A cheap DIY air quality monitoring device.
Project tutorial by Mirko Pavleski
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
A pair of talking smart glass, intended to help the visually impaired.
Project tutorial by Amal Shajan
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Project tutorial by SurtrTech
Check the humidity & temperature of your terrarium with a DTH22 humidity and temperature sensor and display this on an LCD I2C 16x2 display.
Project tutorial by GiftedMedia
Clock without using RTC in Arduino with Temperature and humidity indicator
Project tutorial by ahmadordi
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
A low cost Air Quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Tejas Shah
This video will illustrate the working principle of the Water Quality Monitoring and Notification System.
Project showcase by emmanuel ani
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
Generates maps based on distance between itself and obstacles autonomously and provides visual feedback.
Project tutorial by Satyavrat Wagle
Glowing LED to detect the increase in pressure by pressure pad using Arduino.
Project tutorial by Ashish Kumar Senapati
This project will guide you to set up an alarm system using a motion detector.
Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
Project tutorial by plouc68000
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
by Muhammad Aqib
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
How to interface an IR sensor with an Arduino Uno.
Project tutorial by Electronic Clinic
+ OLED display, measures in imperial and metric.
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
A basic introduction to the low cost and accurate HC-SR04!
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
In this tutorial I am going to show you how to build a Wireless Weather Station with a big 3.2" Color TFT display using Arduino.
Project tutorial by Nick Koumaris
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
by Shubham Shinganapure
Or connect with your social account:
New here? Create an account