Aviation meteorology station with Arduino.
Project in progress by Team ArduWeather Team
Smart weather prediction device which send data to wunderground and receives the predicted 10 day forecast.
Project tutorial by FabLabz
Monitor lake turbidity as well as temperature and humidity with your smartphone via BLE
Project tutorial by Dimiter Kendri
Learn how to model the sensor and getting a reliable distance measurement using Simulink and Arduino.
Project tutorial by Team MATLAB Makers
It can measure fine dust, humidity, temperature and CO2 concentration in the air and check it on the internet in real time.
Project tutorial by 4 developers
A water meter that teaches itself your water consumption trends to manage itself and care for the environment.
Project showcase by Flatbox
A tech high-school student-teacher team from Uruguay developing High Altitude Balloons for science! IN ACTIVE DEVELOPMENT!
Project in progress by Team Club AeroEspacial de la Escuela Tecnica de Melo
Smart traffic control for more livable cities.
Project tutorial by Balázs Simon
Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.
Project tutorial by Jade Perreault
The project consists of reading values for pitch and roll, and communicating the modified values over serial to the display.
Project tutorial by 4D Makers
A PC application that talks to the Walabot PRO, Arduino and NeoPixels!
Project tutorial by Marcel Kruse
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Project tutorial by Kutluhan Aktar
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
The ball and beam system is laboratory equipment with high nonlinearity in its dynamics and PID control.
Project tutorial by Karem Ben Chikha
A smart pollution control device is set near the exhaust of the vehicle to alert the user when they are wasting fuel and causing pollution
by Team Flash
Experimental system for Structural Health Monitoring (SHM), based on the Arduino.
Project showcase by lamaripalma and e-structure_UNO
Project tutorial by MATLAB Makers
Or connect with your social account:
New here? Create an account