Geiger counter measuring radioactivity using Arduino Nano in 3D-printed housing, with OLED display and Li-ion battery.
Project tutorial by Pedro52
This is a 360 radar using an ultrasonic sensor that saves data and encodes them onto an image.
Project tutorial by Alireza Karkon
Water quality, anywhere, anytime!
Project tutorial by Hao Jie Chan
Learn how to model the sensor and getting a reliable distance measurement using Simulink and Arduino.
Project tutorial by MATLAB Makers
Senso is a device that detects deforestation using sound analysis detecting machines used to cut down trees and warning the authorities.
Project tutorial by Andrei Florian
Build a table lamp that's sturdy and smart.
Project tutorial by msr048
In this tutorial I am going to show you how to build a Wireless Weather Station with a big 3.2" Color TFT display using Arduino.
Project tutorial by Nick Koumaris
A fire-monitoring and crowdsourcing tool that will allow local fire managers to respond to wildfires.
Project tutorial by Ajdin Nakičević
Build your own high-quality water sensor to monitor your pool or spa, using the Amazon Alexa to check on the status of your pool.
Project tutorial by Benjamin Winiarski
A super smart buoy with lots of sensors that sends data over radio to a base station where it is displayed on a real-time dashboard!
Project tutorial by T3ch Flicks
The ball and beam system is laboratory equipment with high nonlinearity in its dynamics and PID control.
Project tutorial by Karem Ben Chikha
Arduino Uno-based electronic weighing machine by 5-wire 3 kg load cell.
Project tutorial by Boaz Lawnce
Open source Smart energy monitor with some new features like Terminal Commands, Readings Logger, and Data Plotting.
Project tutorial by Mohamed Maher
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
It can measure fine dust, humidity, temperature and CO2 concentration in the air and check it on the internet in real time.
Project tutorial by 4 developers
So the big aim here is obviously to predict the rain in the future. We'll build a system that does just that from scratch!
Project tutorial by danionescu
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Project tutorial by Team Oizom
A fall detection system based on Arduino, Windows 10 and Microsoft Azure
Project tutorial by Jiong Shi
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Project tutorial by Kutluhan Aktar
The project consists of reading values for pitch and roll, and communicating the modified values over serial to the display.
Project tutorial by 4D Makers
Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.
Project tutorial by Jade Perreault
This is a low cost, modular smart board with wireless capabilities.
Project tutorial by Adellar Irankunda
Smart traffic control for more livable cities.
Project tutorial by Balázs Simon
Or connect with your social account:
New here? Create an account