A small, Arduino-based physical device that can perform different keyboard operations through capacitive touch sensing.
Project tutorial by Amal Mathew
This device can remind user to drink water after a set time interval and can remind users when the water is at a right temperature for drink
Project showcase by Team HB
I am back again with another Arduino based home automation project.
Project tutorial by Tarantula3
Sick of your laptop underperforming or burning you? Check this out!
Project tutorial by Dante Roumega
This is my first project, so please like the project and comment down below.
Project showcase by Imperial_Proggramer
PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small
Project tutorial by DIY Partners
Plant monitoring using Arduino, Alexa and RPi.
Project tutorial by TeamNature
It reads from up to eight temperature sensors (DS18B20) and displays on the LCD display (16x2)
An easy project using stuff from the starter kit: Arduino Uno, temperature sensor, 16x2 LCD display, some LEDs and a Piezo.
Project showcase by GioMac
Trackers generate more electricity than their stationary counterparts due to increased direct exposure to solar rays.
Project showcase by LIMPINGLIM
MQ2 Sensor is a gas module and it is suitable to detect Hydrogen, LPG, Smoke, CO, and Alcohol. It has high sensitivity and fast response.
by Junez Riyaz
Light Status System using Arduino to find the direction and intensity of the light and to receive and process the data in WPF application.
Project tutorial by Alireza Karkon
In this tutorial I am going to show you how to build a Light meter with a big Nokia 5110 LCD display using Arduino.
Project tutorial by Nick Koumaris
In this project I made a touch sensor using a coin that works based on Arduino Capacitive Sensing Library.
Convert PIR into DIY PC's Auto Sleep mode sensor using Arduino
which feels your presence & makes your PC go to or wake up from Sleep mode.
Project tutorial by Gadget Programmers
Temperature is measured from two different sensors and send data through bluetooth and a set of LEDs is lit according to average temperature
Project tutorial by jomar
Clock without using RTC in Arduino with Temperature and humidity indicator
Project tutorial by ahmadordi
This project uses an ultrasonic sensor to "sense" if the door opens or closes.
Project showcase by MattG
Give this the parameters you want and the LEDs will light up according to the temperature cold blue, green fine, red hot
by Luca McLoughlin
In this Tutorial I am going to show you how to build a very useful UV meter with a big Nokia 5110 LCD display using Arduino. Protect ...
We are showing how to use DS18B20 one wire water proof temperature sensor using Arduino.
Project showcase by IoTBoys
It is a simple tutorial on how to create little a security device using an Arduino.
Project tutorial by Ivan
A feedback control system which can control the given fluid level and display us the water level in a tank.
Project tutorial by Rushabh Jain
Light sensor to measure from 0 to 55,000 lux, which is a good range for measuring from the darkest room in a house to the brightest day.
Project tutorial by Jennifer Deegan
Or connect with your social account:
New here? Create an account