My daughter is getting adventurous in her cycling, so I put together a simple logger and speedo to show where she traveled
Project tutorial by au_chrismor
Sniff-out the real tooter.
Project showcase by gadhaguy
A basic introduction to the low cost and accurate HC-SR04!
This project uses an ultrasonic sensor to "sense" if the door opens or closes.
Project showcase by MattG
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
Tracks compass heading, altitude, temperature, pressure, humidity, time, travel distance and GPS location during a hike.
Project tutorial by Shahariar
Bicycle odometer and speedometer showing distance traveled, average and current speed (in km/hr), time and can store up to 99 laps.
Project in progress by alan_dewindt
We can measure body temperature without contact with this device.
Project tutorial by Akshay Joseph
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
Keep that bad virus away from your safe zone. Build your own real-time thermal vision device to detect unwanted visitors at your door.
Project tutorial by Marius Dima
Create a burglar-tripwire with the ultrasonic sensor.
Project tutorial by Will_the_Star
I took an HC-05 and added it to my handheld GPS device to get coordinates on my Android tablet.
Project showcase by Arnov Sharma
Very simple air quality monitor with nice processing graphical interface oh PC monitor.
Project tutorial by Mirko Pavleski
Make a Ultrasonic Range Detector Using Arduino and SR-04F to measure any distance without using rulers with this simple tutorial.
by Team RZtronics
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
This project checks measurements automatically using lasers.
Project in progress by Ingo Lohs
I have started to build it for a homemade amplifier, to set the speed of the fans by the temp of the heathsink and so on.
Project in progress by makeeuropeanu
This project is an Arduino radar. It is a simulation of a radar.
Temperature and humidity control to achieve the ideal confort conditions. The system work in a automatic way without a manual control.
Clock without using RTC in Arduino with Temperature and humidity indicator
Project tutorial by ahmadordi
This tutorial will show you how to use DHT11 with Arduino.
Literally the simplest way to make a weather station!
Project tutorial by Mission Critical
In this project I made a touch sensor using a coin that works based on Arduino Capacitive Sensing Library.
Project tutorial by Amal Mathew
Or connect with your social account:
New here? Create an account