Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
This project will show you how to use an MQ-2 gas sensor.
A really economic street lighting system.
Project showcase by ReddSathvik
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
In this tutorial, you’ll learn how to use the LSM303DLHC GY-511 compass module with Arduino to make a digital compass.
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
Detect movement up to 30' away which is useful in motion-activated projects such as a security system or automatic lighting in a classroom.
Project tutorial by ejshea
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
by Dragos Iosub
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
Literally the simplest way to make a weather station!
Project tutorial by Mission Critical
How to interface a GPS module (NEO-6M) with Arduino Mega. The data for longitude and latitude is displayed on the serial monitor.
Project tutorial by Ruchir Sharma
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
This little project will show you how to use a soil moisture sensor.
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
Copy colours from outside environment.
Project tutorial by Vishwas Navada
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.
Project tutorial by Mirko Pavleski
Read data from an absolute orientation sensor without writing any code!
by Matt Wayland
This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.
As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.
Project tutorial by HeathenHacks
Or connect with your social account:
New here? Create an account