This project will show you how to use an MQ-2 gas sensor.
A really economic street lighting system.
Project showcase by ReddSathvik
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
Replace the PIR motion sensor with this module and it's 360° detection angle baby!
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
by Dragos Iosub
Add hand gestures to your Arduino projects (robots, HMI, lights, etc.).
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
Have you ever wanted to measure the speed of air coming out of your vents at home? Well then we have the perfect project for you.
Project tutorial by Ardunicko
A beginner project utilising an Arduino and a BME280 sensor capable of giving you 4 environmental readings.
by Electorials Electronics
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
+ LCD/OLED can be used to measure body temperature or to detect movement... in Celsius and Fahrenheit!
It is a miniature counterpart of radio altimeter used on commercial aircrafts to be used with RC aircrafts and multirotors.
Project tutorial by AeroGeeks
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by brunogomezgil
This little project will show you how to use a soil moisture sensor.
How to use the small module to measure distance for high frequency applications... or low.
Project tutorial by SurtrTech
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
Read data from an absolute orientation sensor without writing any code!
by Matt Wayland
Or connect with your social account:
New here? Create an account