Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
Project tutorial by plouc68000
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
How to interface an IR sensor with an Arduino Uno.
Project tutorial by Electronic Clinic
+ OLED display, measures in imperial and metric.
Project tutorial by SurtrTech
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
A basic introduction to the low cost and accurate HC-SR04!
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
The Grove Gas Sensor (MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4 and CO.
Project showcase by Mahamudul Karim Khondaker
Bicycle odometer and speedometer showing distance traveled, average and current speed (in km/hr), time and can store up to 99 laps.
Project in progress by alan_dewindt
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
This project shows how to change color of Minion using Arduino, PHPoC WiFi Shield and color sensor.
Project tutorial by khanhhs
When paper shredder is filled by paper trash, Arduino notifies someone via Gmail that the trash bin is full and it should be taken out.
Project showcase by phpoc_man
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
6.4A-20nA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.
Project showcase by wfriedrich
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.
Project tutorial by ThothLoki
Soil moisture sensor which gives you LCD display of percentage of moisture.
Project tutorial by Patel Darshil
It is a simple tutorial on how to create little a security device using an Arduino.
Project tutorial by Ivan
The sunflower follows the light using a servo motor and two photoresistors.
Project tutorial by Rick_Findus
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
Clock without using RTC in Arduino with Temperature and humidity indicator
Project tutorial by ahmadordi
How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.
Project tutorial by hwhardsoft
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
This projects detects knock using Arduino UNO and sends notification to Windows 10, Ubuntu.
by Random Science Stuff
Or connect with your social account:
New here? Create an account