In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
I took an HC-05 and added it to my handheld GPS device to get coordinates on my Android tablet.
Project showcase by Arnov Sharma
Basic weather system, in/out temp and humidity with heat index, dew point, pressure and weather prediction and time and date.
Project showcase by Fathead
FSM that allows to identify the direction of the object.
Project showcase by sergioluz
They claim umbrellas own the ability to prevent from UV. We would like to know the fact and measure the UV value under umbrellas.
Project showcase by Team NTPC Young Maker Studio
An easy-to-build and low-cost water quality monitor.
Project showcase by Wen-Liang Lin
Here we measure rainfall.
Project showcase by Mahamudul Karim Khondaker
The Grove Gas Sensor (MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4 and CO.
This device can remind user to drink water after a set time interval and can remind users when the water is at a right temperature for drink
Project showcase by Team HB
This is my first project, so please like the project and comment down below.
Project showcase by Imperial_Proggramer
An easy project using stuff from the starter kit: Arduino Uno, temperature sensor, 16x2 LCD display, some LEDs and a Piezo.
Project showcase by GioMac
Trackers generate more electricity than their stationary counterparts due to increased direct exposure to solar rays.
Project showcase by LIMPINGLIM
This project uses an ultrasonic sensor to "sense" if the door opens or closes.
Project showcase by MattG
We are showing how to use DS18B20 one wire water proof temperature sensor using Arduino.
Project showcase by IoTBoys
LPG leakage is monitored using arduino and MQ2 gas sensor module.
the concentration of LPG particles are plotted using serial plotter.
Project showcase by TEAM DIY
A beginner-tier project I hope will help the fellows that are newbies in the Arduino world!
Project showcase by onatto22
This is a 6x plant moisture sensor using Cayenne & a 3D printed case.
Project showcase by Mitch K
Know what you breathe. A handy and wearable hazardous gas detection system with LED indication.
Project showcase by Patel Darshil
This is a temperature tensor that is made using an Arduino UNO and an LM35 sensor which measures the temperature of a given
Project showcase by Abishek Bhalaaji
On the display is printed temperature (celsius) and humidity (%) with a DHT11. When it's raining the LED lights up. You need a rain sensor!
Project showcase by Rick_Findus
This is a simple prototype of light and reading distance keeper, built with Arduino Uno, ultrasonic HC-SR04, mini solar cell 0.5v, some LED.
Project showcase by Lintang Wisesa
This parking sensor with Arduino is an easy project.
Project showcase by Team VINICIUS LOPES
Basic instructions on building a simple auto fan.
Project showcase by Ömer Beden
Or connect with your social account:
New here? Create an account