Basic weather station with DHT11 sensor, Arduino, BLE Shield and iShield App.
Project tutorial by Victor Carreño
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
I've always wondered if there were any real differences between temperature and humidity sensors, especially DHT11 and DHT22.
by Achraf Oukheir
Soil moisture sensor which gives you LCD display of percentage of moisture.
Project tutorial by Patel Darshil
Need your project to gauge distance? Here's your module!
This project is about a simple inclinometer using Arduino 101 including temperature feature and auto rotation of display (upside down view).
Project tutorial by LAGSILVA
Detect movement up to 30' away which is useful in motion-activated projects such as a security system or automatic lighting in a classroom.
Project tutorial by ejshea
Predictive maintenance of industrial motors using high precision 3D magnetic sensor TLV493D-A1B6.
Project tutorial by Vishwas Navada
Connect Infrared Obstacle Avoidance Sensor to Arduino Nano and program it to detect obstacles - Quick and Easy!
by Boian Mitov
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
Read the soil moisture level (Dry-Perfect-Wet) and display results on a corresponding LED.
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
I'll show you, how to monitor some hardware variables.
Project tutorial by zakrzu
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
by Dragos Iosub
This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.
Project tutorial by ThothLoki
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
Replace the PIR motion sensor with this module and it's 360° detection angle baby!
In this tutorial, you’ll learn how to use the LSM303DLHC GY-511 compass module with Arduino to make a digital compass.
Using one single module and a proper library you'll be able to measure any AC voltage like a TRMS multimeter.
Project tutorial by SurtrTech
Make an EC/pH/ORP/temperature sensor device to monitor water. Interact with it through a website using Bluetooth Low Energy.
Project tutorial by uFire
In this project, I have shown how to interface a GPS module with Arduino UNO. The data for longitude and latitude is displayed on the LCD.
Project tutorial by Ruchir Sharma
Make a Ultrasonic Range Detector Using Arduino and SR-04F to measure any distance without using rulers with this simple tutorial.
by Team RZtronics
A short and easy tutorial on how to interface the module with UNO board using simple examples.
Or connect with your social account:
New here? Create an account