In this project, I have shown how to interface a GPS module with Arduino UNO. The data for longitude and latitude is displayed on the LCD.

Make a Ultrasonic Range Detector Using Arduino and SR-04F to measure any distance without using rulers with this simple tutorial.

This is an updated version of the fire alarm I made. it includes a gas sensor and an app for control

ACS712 current sensor by Allegro is an Hall effect-based linear current sensor.

This tutorial will show you how to use DHT11 with Arduino.

Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.

Portable project that displays the current temperature on an LCD display.

Using the RCWL-0516 radar sensor to detect motion.

It might be the simplest room temperature and humidity - no breadboard attached.

In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.

Periodically store celsius values of six TMP36 sensors to a csv file on an SD card and show values on LCD.

It is a simple tutorial on how to create little a security device using an Arduino.

This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.

This parking sensor with Arduino is an easy project.

Our Gnome becomes a weather forecaster with an Arduino Nano Every and a pressure sensor. Get your local forecast without the internet.

This is the first version of my Arduino Weather Station, a very simple project that will give you weather information.

How to get better results with HCSR04.

A basic introduction to the low cost and accurate HC-SR04!

+ LCD/OLED can be used to measure body temperature or to detect movement... in Celsius and Fahrenheit!

How to interface an IR sensor with an Arduino Uno.

This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback.

Simple Temperature Monitoring with DHT22 & Arduino.

This project uses an ultrasonic sensor to "sense" if the door opens or closes.

Easy to build temperature and humidity sensor with a cheap 2x16 LCD.