Code and explanation for getting directional and motion data from the raw sensor outputs.
by Samhita Ganguly and Shubham Paul
This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
A useful tool to visualize at real time data of the MPU9250 sent through a COM port.
Detect the presence of alcohol with Arduino.
by Yashik Ibrahim
This lesson aims to show how to use the famous PCF8563 (a real time clock RTC) with Arduino through the library written by Joe Robertson.
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
Monitor the quality of your sleep and live better.
by Team SrVassili
Real-time pH and salinity monitoring with LED indicators.
by Atlas Scientific
A system to maintain the pH level of a sample within a defined range.
The HMC5883is a digital compass designed for low-field magnetic sensing. This device has a wide magnetic field range of +/-8 Oe.
by Dcube Tech Ventures
SHT25 I2C Humidity and Temperature Sensor ±1.8%RH ±0.2°C I2C Mini Module.
This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
by Shubham Shinganapure
CPS120 is a high quality and low cost capacitive absolute pressure sensor with fully compensated output.
Building a rain sensing alarm with Arduino.
by Smit Babariya
How to build a simple and accurate thermometer using an active temperature sensor (MCP9071/A).
An IoT device to automatically switch on/off electronic appliances based on the availability of human beings, especially in public services.
by Revathi Kannan
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
by Jen Fox and Hacking STEM
MCP9808 is a highly accurate digital temperature sensor ±0.5°C I2C mini module.
BMA250 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g.
BMG160 is basically a 16-bit, digital, tri-axial, gyroscope sensor which can measure angular rates.
In this project I will guide you on how to make your own Arduino Chameleon using TCS3200 and Arduino Uno.
by Manan Thareja
How to temperature compensate the Atlas salinity sensor automatically.
Or connect with your social account:
New here? Create an account