If you have to drill a certain depth for a project, you need a bench drill with depth display. See how simple it works in this project.
Project tutorial by Thomas Angielsky
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Project tutorial by Mirko Pavleski
Pulse induction metal detector, built on the Arduino Nano.
Project showcase by Alexey
Pulse induction Metal Detector. It can detect a metal coin at a distance of 15 cm and a larger metal object at a distance of 40 cm and more.
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Here we use PIR sensor and Arduino to detect the motion of a hand. This detection can be used to operate electronic equipment.
Project tutorial by ElectroPeak
Smarter Home Energy Use with Open Source and Cheap Sensors.
Project in progress by Andrew Jawitz
The detector can detect a small metal coin at a distance of 15 centimeters.
This is a very precise scale for any weight up to 1.5 kg!
Project showcase by mPelectronic
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Kavyashree P
Dear friends welcome to another tutorial! Today we are going to build an interesting Arduino project which is using a fingerprint sensor ...
Project tutorial by Nick Koumaris
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
Use the cheap Fiagro TGS4161 Sensor to monitor CO2
Project in progress by Vladimir Savchenko
Let us predict the changes around us with Arduino
Project tutorial by Prajjwal Nag
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
It is hard to measure the height of the children. So, we made Height Measure using distance sensor VL53L0X.
Project tutorial by HomeMadeGarbage
Arduino Nano and Visuino: Plot BME280 Temperature, Humidity and Pressure on Nextion Display Scope - Quick and Easy
Project tutorial by Boian Mitov
This project is about a simple movement detector. Whenever any obstacle comes in a line (predefined) a light will glow.
Project showcase by Sriram MN
A simple project to make a GPS log station with data speed, max speed, distance trip and altitude. all data are write on SD card
Project tutorial by wrighi
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!
Project in progress by Dhairya Parikh
Portable range/distance detection device using an Arduino, ultrasonic sensor, and buzzer.
Project tutorial by Viktor S
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
How to build an humidity and temperature meter with time display from an old voltage meter casing.
Project showcase by Mr_Xu
Or connect with your social account:
New here? Create an account