The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Power monitoring, appliance detection using Arduino and save data into a Text file, Google Sheet for creating graphs and analysis.
Project tutorial by bhaskar
Pulse induction metal detector, built on the Arduino Nano.
Project showcase by FoxyLab
Portable range/distance detection device using an Arduino, ultrasonic sensor, and buzzer.
Project tutorial by Viktor S
It is hard to measure the height of the children. So, we made Height Measure using distance sensor VL53L0X.
Project tutorial by HomeMadeGarbage
The detector can detect a small metal coin at a distance of 15 centimeters.
Project tutorial by Mirko Pavleski
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
This fully functioning Geiger counter was designed after the PKE Meter from the 1980s Ghostbusters movie.
Project showcase by mvonsivers
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Dear friends welcome to another tutorial! Today we are going to build an interesting Arduino project which is using a fingerprint sensor ...
Project tutorial by Nick Koumaris
Like God's Sight || Arduino Nano based PIR motion tone alarm.
by Boaz Lawnce
The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.
Project tutorial by ElectronicsLovers
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
A digital stadiometer for human height measurement.
Project tutorial by fmarzocca
Project tutorial by dev009
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
This project is about a simple movement detector. Whenever any obstacle comes in a line (predefined) a light will glow.
Project showcase by Sriram MN
The HMC5883is a digital compass designed for low-field magnetic sensing. This device has a wide magnetic field range of +/-8 Oe.
by Dcube Tech Ventures
How long were we released from the gravity of the Earth? This machine measures how many seconds we are zero gravity state.
Project showcase by hminowa
In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller
Here we use PIR sensor and Arduino to detect the motion of a hand. This detection can be used to operate electronic equipment.
Project tutorial by ElectroPeak
Smarter Home Energy Use with Open Source and Cheap Sensors.
Project in progress by Andrew Jawitz
Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.
Project tutorial by Kutluhan Aktar
Get the weather information through an Android app constantly and use the solar energy generating by the PV panel to charge devices.
Or connect with your social account:
New here? Create an account