This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
Code and explanation for getting directional and motion data from the raw sensor outputs.
by Shubham Paul and Samhita Ganguly
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
Detect the presence of alcohol with Arduino.
by Yashik Ibrahim
Real-time pH and salinity monitoring with LED indicators.
by Atlas Scientific
A system to maintain the pH level of a sample within a defined range.
A useful tool to visualize at real time data of the MPU9250 sent through a COM port.
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
This lesson aims to show how to use the famous PCF8563 (a real time clock RTC) with Arduino through the library written by Joe Robertson.
Monitor the quality of your sleep and live better.
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
by Omron Electronic Components LLC
Building a rain sensing alarm with Arduino.
by Smit Babariya
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
by Jen Fox and Hacking STEM
The HMC5883is a digital compass designed for low-field magnetic sensing. This device has a wide magnetic field range of +/-8 Oe.
by Dcube Tech Ventures
This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
by Shubham Shinganapure
How to build a simple and accurate thermometer using an active temperature sensor (MCP9071/A).
How to temperature compensate the Atlas salinity sensor automatically.
CPS120 is a high quality and low cost capacitive absolute pressure sensor with fully compensated output.
SHT25 I2C Humidity and Temperature Sensor ±1.8%RH ±0.2°C I2C Mini Module.
In this tutorial, you’ll learn about the TCS230 sensor and how to use it with Arduino to recognize colors.
MCP9808 is a highly accurate digital temperature sensor ±0.5°C I2C mini module.
An IoT device to automatically switch on/off electronic appliances based on the availability of human beings, especially in public services.
by Revathi Kannan
BMG160 is basically a 16-bit, digital, tri-axial, gyroscope sensor which can measure angular rates.
Or connect with your social account:
New here? Create an account