Consistently individuals bring about an enormous loss of property a life because of fire and blasts. Fire being one of the savage component
Project in progress by Sagnik Ghosh
A telescope alignment compass, for amateur stronomes, without GPS
Project tutorial by Armando Leonardo
Provide continuous info about room temperature, humidity, CO2 and luminoscity levels and turn on leds at the end of the work to relax eyes
Project tutorial by Diana Khalipina
If you can't fix it in software you'll have to fix it in hardware in this case. Hence the NMEAtor.
Project in progress by Waps 61
Setting up a new blade for a band saw is sometimes a hard job. But there could be help with Arduino power.
Project tutorial by Thomas Angielsky
Park your car with help from the power of the sun!
Project tutorial by aams86
Non-contact temperature measurement using GY-90615 IR sensor.
Project tutorial by engineeringuofs
Easily monitorize your garden's environment with simple components.
Project tutorial by Enrique
In this tutorial, you’ll learn about the TCS230 sensor and how to use it with Arduino to recognize colors.
Brainium Bridge Baby Monitor for predictive maintenance in bridges.
Project tutorial by Alejandro Sanchez and Victor Altamirano
Project tutorial by Techatronic
A low-power Arduino car counter that works by logging each time a car drives over a rubber tube across the road.
Project tutorial by Aetos999
This is a simple and fun project with pocket friendly budget.
Project tutorial by dnbakshi07
Mount in front of your garage to help you park at teh exact right distance.
Project tutorial by Robert Persichitte
The VL53l01x distance sensor as EV3 sensor.
Project in progress by Tom Eilers
CO2 monitor and log based on MQ-135 with temperature and relative humidity correction.
Project showcase by ArduinoKoen
Use the IO Expander and accessories to connect OLED screens and I2C sensors over a 100ft away.
Project tutorial by Christian
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
by Omron Electronic Components LLC
Replicate a 3D environment in real-time!
Project showcase by Travis Ledo
Project stabilometric platform made with Arduino. Stabilometric platform can be used for medical rehabilitation and games.
Home power usage monitor, implementing for the Arduino Due. This sketch show running average of voltage, making it easier to dial it in.
Project in progress by xekon
In this project I show how to build a particles detector with data display, data backup on SD card and IoT with Android application.
The values of t° sensors DS18B20, waterproofed DS18B20, AM2302 will be compared with micro:bit temperature sensor and standard thermometer.
Or connect with your social account:
New here? Create an account