This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
by Omron Electronic Components LLC
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
Code and explanation for getting directional and motion data from the raw sensor outputs.
by Shubham Paul and Samhita Ganguly
Detect the presence of alcohol with Arduino.
by Yashik Ibrahim
In this project, different sensors for the quantification of water availability in plans are compared for smart irrigation applications.
by Antonio Ruiz
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
A system to maintain the pH level of a sample within a defined range.
by Atlas Scientific
CPS120 is a high quality and low cost capacitive absolute pressure sensor with fully compensated output.
by Dcube Tech Ventures
The cheapest amplifier on the market to assemble DIY seismometer projects
This lesson aims to show how to use the famous PCF8563 (a real time clock RTC) with Arduino through the library written by Joe Robertson.
In this project I will guide you on how to make your own Arduino Chameleon using TCS3200 and Arduino Uno.
by Manan Thareja
A useful tool to visualize at real time data of the MPU9250 sent through a COM port.
How to read HDC2010 temperature and humidity sensor data and comfort zone alerts Arduino using HDC2010 I2C breakout by itbrainpower.net.
by Dragos Iosub
Real-time pH and salinity monitoring with LED indicators.
Building a rain sensing alarm with Arduino.
by Smit Babariya
Monitor the quality of your sleep and live better.
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
by Jen Fox and Hacking STEM
This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
by Shubham Shinganapure
The HMC5883is a digital compass designed for low-field magnetic sensing. This device has a wide magnetic field range of +/-8 Oe.
How to build a simple and accurate thermometer using an active temperature sensor (MCP9071/A).
How to temperature compensate the Atlas conductivity sensor automatically.
In this tutorial, you’ll learn about the TCS230 sensor and how to use it with Arduino to recognize colors.
Or connect with your social account:
New here? Create an account