Non-contact temperature measurement using GY-90615 IR sensor.
Project tutorial by engineeringuofs
Pulse induction metal detector, built on the Arduino Nano.
Project showcase by Alexey
LIDAR stands for Light Detection and Ranging. LIDAR is used for many applications including 3D scanning, mapping, laser guidance, etc.
Project tutorial by abhinav
This lesson aims to show how to use the famous PCF8563 (a real time clock RTC) with Arduino through the library written by Joe Robertson.
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.
Project tutorial by Kutluhan Aktar
Project stabilometric platform made with Arduino. Stabilometric platform can be used for medical rehabilitation and games.
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
Project tutorial by Mirko Pavleski
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
by Omron Electronic Components LLC
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
Project in progress by Gabriel Alejandro Giraldo Santiago
Save time by knowing whether the Faculty is in his chamber or not.
Project showcase by Kaustubh Agarwal
In this project I show how to build a particles detector with data display, data backup on SD card and IoT with Android application.
Water quality data monitoring for swimming pools, fish aquarium and more!
Project tutorial by Animo!
A telescope alignment compass, for amateur stronomes, without GPS
Project tutorial by Armando Leonardo
This project will calculate the water content of soil around a plant by measuring the dielectric constant.
Project tutorial by millerman4487
If you can't fix it in software you'll have to fix it in hardware in this case. Hence the NMEAtor.
Project in progress by Waps 61
BrewBench - Is an Arduino home brewing kettle temperature monitor, controller and notification system. It can work as a RIMS system.
Project tutorial by Team BrewBench
Provide continuous info about room temperature, humidity, CO2 and luminoscity levels and turn on leds at the end of the work to relax eyes
Project tutorial by Diana Khalipina
A digital finger sensor to protect against theft.
Project tutorial by 4 developers
Monitor the world's rivers and lakes through a collaborative cloud allowing you to monitor any body of water with a fleet of devices.
Project tutorial by Andrei Florian
Arduino project to detect lightnings using electromagnetic radiation with frequencies from 7-9kHz.
Project tutorial by runtimeprojects
How to use a GY86 (wave measurements) and water temperature sensor.
Project tutorial by T3ch Flicks
A pair of talking smart glass, intended to help the visually impaired.
Project tutorial by Amal Shajan
Code and explanation for getting directional and motion data from the raw sensor outputs.
by Samhita Ganguly and Shubham Paul
Or connect with your social account:
New here? Create an account