In this project, different sensors for the quantification of water availability in plans are compared for smart irrigation applications.
by Antonio Ruiz
The cheapest amplifier on the market to assemble DIY seismometer projects
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
by Jen Fox and Hacking STEM
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
by Omron Electronic Components LLC
A system to maintain the pH level of a sample within a defined range.
by Atlas Scientific
How to temperature compensate the Atlas conductivity sensor automatically.
Real-time pH and salinity monitoring with LED indicators.
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
Detect the presence of alcohol with Arduino.
by Yashik Ibrahim
CPS120 is a high quality and low cost capacitive absolute pressure sensor with fully compensated output.
by Dcube Tech Ventures
This lesson aims to show how to use the famous PCF8563 (a real time clock RTC) with Arduino through the library written by Joe Robertson.
Code and explanation for getting directional and motion data from the raw sensor outputs.
by Shubham Paul and Samhita Ganguly
This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
by Shubham Shinganapure
In this tutorial, you’ll learn about the TCS230 sensor and how to use it with Arduino to recognize colors.
How to read HDC2010 temperature and humidity sensor data and comfort zone alerts Arduino using HDC2010 I2C breakout by itbrainpower.net.
by Dragos Iosub
Monitor the quality of your sleep and live better.
by Team SrVassili
Put on your aerospace engineering hat! Explore how different materials absorb and transmit heat to simulate space capsule re-entry to earth!
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
Building a rain sensing alarm with Arduino.
by Smit Babariya
How to build a simple and accurate thermometer using an active temperature sensor (MCP9071/A).
The HMC5883is a digital compass designed for low-field magnetic sensing. This device has a wide magnetic field range of +/-8 Oe.
In this project I will guide you on how to make your own Arduino Chameleon using TCS3200 and Arduino Uno.
by Manan Thareja
Or connect with your social account:
New here? Create an account