As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.
Project tutorial by HeathenHacks
During the summers, many people get sunstroke because of playing in the sun for too long. So this device will prevent getting sunstroke.
Project tutorial by Hemesh chadalavada
If you have a broken hard disk you can hack it, turning it into an input device. This hack is very simple and only needs some soldering.
Project tutorial by Arduino_Scuola
An adequate tool to keep in your First aid kit.
Project tutorial by Jayraj Desai
Have you ever wanted to measure the speed of air coming out of your vents at home? Well then we have the perfect project for you.
Project tutorial by Ardunicko
Evaluate the amount of the energy generated by a solar panel at a given direction through light intensity levels.
Project tutorial by Kutluhan Aktar
Sniffing 434 MHz remote outlet codes to repeat the codes with a microcontroller.
Project tutorial by Garrett Bartley
We connected a Vernier Temperature Probe and Motion Detector to an Arduino Uno to detect black ice on roads.
Project tutorial by 3 developers
Make an Electricity Monitor for your home that utilises the cloud of the Arduino Yun, Temboo and Google Drive
Project tutorial by Anthony Kelly
Monitor lightning activity and get alerted on dangerous situations.
Project tutorial by Christos Chatzigeorgiou
Using ARTIK cloud to monitor cabin seat state.
Project tutorial by Wen-Liang Lin
Analyse concrete, metal, wood structures for bends and angles and alerts if they have deviated from the original position.
Project tutorial by Tharindu Suraj
A handheld monitor for young scientists to get familiar with various aspects of the surrounding environment.
Project tutorial by Chathuranga Liyanage
You can close your eyes, but you cannot close your ears.
Project tutorial by Team Xspies
Monitor your precious plant wirelessly with FlowerPot monitor.
Project tutorial by Andrei Florian
The project consists of reading values for pitch and roll, and communicating the modified values over serial to the display.
Project tutorial by 4D Makers
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
Project tutorial by Mirko Pavleski
When you put anything in front of your mobile camera and push the button, your mobile will say the color of that thing.
Project tutorial by Ahmed Elsagaan
Arduino + LCD + DHT11 sensor + Lego = Awesome temp/humidity display
Project tutorial by YENFU CHEN
USB LiPo battery powered, Arduino-based non-contact IR thermometer, stopwatch, inactivity tracker, cooking timer with alarm & 7-Seg Display.
Project tutorial by Shahariar
There are a lot of Arduino-based metal detectors using various technologies. This is one of them that uses direct frequency measurement.
Project tutorial by Andrius Purr
The ball and beam system is laboratory equipment with high nonlinearity in its dynamics and PID control.
Project tutorial by Karem Ben Chikha
Temperature is measured from two different sensors and send data through bluetooth and a set of LEDs is lit according to average temperature
Project tutorial by jomar
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
Or connect with your social account:
New here? Create an account