Spending $1,000 on suspension repairs because the city failed to fix the potholes? This project makes sure that never happens again.

Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.

Automated colour transmission and reflection measurement system for quantifying results of measurements with a colour change.

Read data from an absolute orientation sensor without writing any code!

How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.

How long were we released from the gravity of the Earth? This machine measures how many seconds we are zero gravity state.

Track the sun in X and Y with this simple Arduino project.

This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.

As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.

+ OLED display, measures in imperial and metric.

Create a burglar-tripwire with the ultrasonic sensor.

Measure distance using JSN SR-04T waterproof ultrasound module and an LCD I2C (cm/inches).

The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.

Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.

So the big aim here is obviously to predict the rain in the future. We'll build a system that does just that from scratch!

A smart valve that automatically stops the flammable gas supply when gas leakage takes place or fire occurs for protection.

Periodically measure environmental conditions and send them to WolkAbout IoT Platform to monitor the environment remotely.

Using one single module and a proper library you'll be able to measure any AC voltage like a TRMS multimeter.

The purpose of "kukO2“ is to detect the CO2 content in indoor areas.

During the summers, many people get sunstroke because of playing in the sun for too long. So this device will prevent getting sunstroke.

An Arduino electromechanical barometer.

My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely without taking

Glowing LED to detect the increase in pressure by pressure pad using Arduino.

Like a real pyranometer, realize a measurement of sun power.