Capacitance capabilities at the tip of your finger!
Project tutorial by Tal O
6.4A-20nA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.
Project showcase by wfriedrich
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Project in progress by philippedc
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
How to interface an IR sensor with an Arduino Uno.
Project tutorial by Electronic Clinic
Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
Project tutorial by plouc68000
Put on your aerospace engineering hat! Explore how different materials absorb and transmit heat to simulate space capsule re-entry to earth!
This project will show you how to use an MQ-2 gas sensor.
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
A really economic street lighting system.
Project showcase by ReddSathvik
Build a table lamp that's sturdy and smart.
Project tutorial by msr048
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
The Zeus Weather Station (ZEWS) is an initiative of the Harry Fultz Institute Open Source Club to promote open source hardware and software.
Project in progress by moisi
Replace the PIR motion sensor with this module and it's 360° detection angle baby!
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
by Dragos Iosub
We aim to provide a low-cost precision agriculture solution powered by biophotovoltaics, and we start with developing a prototype.
Project in progress by eCO-SENSE
Add hand gestures to your Arduino projects (robots, HMI, lights, etc.).
How to read HDC2010 temperature and humidity sensor data and comfort zone alerts Arduino using HDC2010 I2C breakout by itbrainpower.net.
An easily customizable Geiger Muller counter.
Project tutorial by juliandwillett
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
How to temperature compensate the Atlas salinity sensor automatically.
by Atlas Scientific
Real-time pH and salinity monitoring with LED indicators.
A system to maintain the pH level of a sample within a defined range.
Or connect with your social account:
New here? Create an account