This simple Arduino project can limit the number of people inside a shop and maintain social distancing in an automated contact free way.
Project tutorial by harrrrrrrrrrrrrrrry
This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.
Project tutorial by ThothLoki
Use the DHT Temperature Sensors in C# code via a C++ Windows Runtime Component to implement a one-wire protocol on Windows 10 and the RPI2.
Project tutorial by Daniel Porrey
Water quality, anywhere, anytime!
Project tutorial by Hao Jie Chan
This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback.
Project tutorial by Ammar Atef Ali
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
It is a simple tutorial on how to create little a security device using an Arduino.
Project tutorial by Ivan
Use HC-SR04 on Arduino with Processing
Project tutorial by Tony ZHANG
The sunflower follows the light using a servo motor and two photoresistors.
Project tutorial by Mako
Controls cursor using a simple joystick
Project tutorial by Shubham Santosh
This is the first generation of my Arduino based mini-weather station with Wi-Fi connection, which is able to post data publicly online.
Project tutorial by Igor Fonseca Albuquerque
I'm going to show you how to make an LCD thermometer with an Arduino UNO and a LM35/36 analog temperature sensor.
Project tutorial by Konstantin Dimitrov
Clock without using RTC in Arduino with Temperature and humidity indicator
Project tutorial by ahmadordi
The ESP system make it easy to recognize gestures you make using an accelerometer.
Project tutorial by mellis
Check the humidity & temperature of your terrarium with a DTH22 humidity and temperature sensor and display this on an LCD I2C 16x2 display.
Project tutorial by GiftedMedia
Short and easy, read distance 2 - 400 cm and plot it in I2C OLED screen.
Project tutorial by javier muñoz sáez
A step-by-step tutorial for interfacing an IMU (Inertial Measurement Unit) sensor with an Arduino and reading the Yaw, Pitch & Roll values.
Project tutorial by Aritro Mukherjee
We built a stylish and useful humidity and temperature sensor for our home workshop that uses color to alert us to big swings in humidity.
Project tutorial by Wicked Makers
We connect a VL53L0X Laser time-of-flight sensor to an Arduino to measure the liquid level in a tank using ToF ranging.
Project tutorial by Team ProtoCentral
Soil moisture sensor which gives you LCD display of percentage of moisture.
Project tutorial by Patel Darshil
Uses an accelerometer to level a platform.
Project tutorial by Mark Tashiro
LIDAR stands for Light Detection and Ranging. LIDAR is used for many applications including 3D scanning, mapping, laser guidance, etc.
Project tutorial by abhinav
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
Very useful project made at school that detects some weather data.
Project tutorial by GilettaStefano
Or connect with your social account:
New here? Create an account