Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
Project tutorial by plouc68000
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
How to interface an IR sensor with an Arduino Uno.
Project tutorial by Electronic Clinic
+ OLED display, measures in imperial and metric.
Project tutorial by SurtrTech
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
A basic introduction to the low cost and accurate HC-SR04!
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
This video will illustrate the working principle of the Water Quality Monitoring and Notification System.
Project showcase by emmanuel ani
This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
by Shubham Shinganapure
The Grove Gas Sensor (MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4 and CO.
Project showcase by Mahamudul Karim Khondaker
Bicycle odometer and speedometer showing distance traveled, average and current speed (in km/hr), time and can store up to 99 laps.
Project in progress by alan_dewindt
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Project in progress by philippedc
This project shows how to change color of Minion using Arduino, PHPoC WiFi Shield and color sensor.
Project tutorial by khanhhs
When paper shredder is filled by paper trash, Arduino notifies someone via Gmail that the trash bin is full and it should be taken out.
Project showcase by phpoc_man
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
6.4A-20nA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.
Project showcase by wfriedrich
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.
Project tutorial by ThothLoki
Soil moisture sensor which gives you LCD display of percentage of moisture.
Project tutorial by Patel Darshil
It is a simple tutorial on how to create little a security device using an Arduino.
Project tutorial by Ivan
The sunflower follows the light using a servo motor and two photoresistors.
Project tutorial by Rick_Findus
Has your phone ever told you that it rained and you didn't water your plants and then it actually didn't and your plants died? Never Again!
Project tutorial by Team King Bros
Or connect with your social account:
New here? Create an account