A radar built using Power-KI, Arduino and LIDAR-Lite sensor.

Tornadoes are still a mystery to scientists due to the difficulty of collecting data. We've learned a lot through research, but not enough.

In this pro-tip we show you how to use the BGT60LTR11AIP radar shield for motion detection and how to use the Infineon 60GHz Radar library.

Via MKR GSM 1400, collate water quality data from resources over GPRS to train a Neuton model, run the model, and transmit results via SMS.

A TinyML model using Arduino Portenta and Edge Impulse to predict the anomalous operation in Industrial machineries like Pump, valves & fans

EdgeAI made simple - Exploring Image Processing (Image Classification) on microcontrollers with Arduino Portenta, Edge Impulse, and OpenMV

Set your values and let technologie do the rest... #cloudgames2022

Using an anomaly detection model and an Opla IOT kit, determine if a boiler is functioning correctly and if it requires maintenance!

Arduino MKR & IoT Cloud will tell me if my boat is safe and ready for action even when I'm miles away from the marina.

An electronic spirit level using 'Motion Gestures' to get things horizontal OR to the slope of your choice!

Help your baby plants get the sunlight they need while protecting them from wild temperature variations.

Know what is in your air! Use an IOT carrier board with sensors to monitor your environment. #CloudGames2022

Easily check liquid level with Arduino Cloud.

Let's fly this rocket with the Oplà IoT Kit and a Verizon WiFi hotspot on board, while monitoring the sensors from the ground.

Experimenting with air-writing recognition on Arduino’s smallest board

This is a 3D Scanner. An ultrasonic sensor is rotated by the servo motor. The object to be scanned is revolved by a motor. Plots in Python.

This project, based on an IKEA clock, shows the time and the CO2 level in the room.

Via Nano 33 BLE, collate local weather data, build and train a TensorFlow neural network model, and run the model to predict air quality.

Here I'm demonstrating a simple led circuit being controlled by hand gestures using python-openCv and arduino

Measuring temperature and humidity featuring LC display and webserver upload using Arduino with Ethernet shield, LCD and realtime clock

Know the Indoor Air Quality (IAQ) and CO2 measurements for the room you are in using the new Arduino Nicla Sense ME!

An object detection method using MobileNetV2 in Edge Impulse on Nvidia Jetson Nano to detect the pedestrian in blind spot region.

Super simple Weather station containing only two components.

Testing 2 sensors sensitivity according to sharp temperature reduction. How long do sensors need to stabilize accurate temperature.