This is a manual and automatic irrigation system
Project showcase by tusham_agarwal and akroid
The “Bubble-Logger SPIEDEL” is an Arduino based floating hydrometer there monitor your fermentation for beer making.
Project showcase by kbaggen
This is an updated version of the fire alarm I made. it includes a gas sensor and an app for control
Project showcase by ayanfeoluwaadekanye1
This circuit measure the water level of a tank and wirelessly send it to a receiver where it is displayed using a LCD display and LEDs.
Project showcase by Manusha_Ramanayake
This device allows you to record current, voltage, and power values onto an SD card. Recorded data can help to create useful graphs.
Project showcase by Varun Chandrashekhar
Consistently individuals bring about an enormous loss of property a life because of fire and blasts. Fire being one of the savage component
Project showcase by Sagnik Ghosh
Simple and effective method (some police is using too) how to measure the side distance to an overtaking car.
Project showcase by theodorbenad
Sniff-out the real tooter.
Project showcase by GadhaGod
CO2 monitor and log based on MQ-135 with temperature and relative humidity correction.
Project showcase by ArduinoKoen
Replicate a 3D environment in real-time!
Project showcase by Travis Ledo
After talking to a friend about his electric tricycle and how the window fogs up when it's cool out I thought it would be fun to monitor it.
Project showcase by tomwyonkman
6.4A-2uA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.
Project showcase by wfriedrich
A really economic street lighting system.
Project showcase by ReddSathvik
This fully functioning Geiger counter was designed after the PKE Meter from the 1980s Ghostbusters movie.
Project showcase by mvonsivers
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
Pulse induction metal detector, built on the Arduino Nano.
Project showcase by Alexey
In this project I created a pretty simple digital level using a LCD screen and a gyro sensor.
Project showcase by elegoo-arduino
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
Experimental system for Structural Health Monitoring (SHM), based on the Arduino.
Project showcase by e-structure_UNO and lamaripalma
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
How long were we released from the gravity of the Earth? This device measures how many seconds we are weightlessness state.
Project showcase by hminowa
An automated probe that collect CO2 flux data on lake Mendota, WI.
Project showcase by SHUAI ZHANG
Basic weather system, in/out temp and humidity with heat index, dew point, pressure and weather prediction and time and date.
Project showcase by Fathead
This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.
Project showcase by Telina
Or connect with your social account:
New here? Create an account