This circuit measure the water level of a tank and wirelessly send it to a receiver where it is displayed using a LCD display and LEDs.
Project showcase by Manusha_Ramanayake
Scan the leaves of a plant with an Arduino Nano 33 BLE Sense and train a model to detect if it's diseased.
Project tutorial by Arduino “having11” Guy
Better code for the MMA8452Q
Project tutorial by smuqui
Using Arduino and the sensors I analysed how a small air humidifier can change the parameters of the room and influence health state.
Project tutorial by Diana Khalipina
Using websockets on one Arduino MKR1000 connected to wifi, I send temp & humidity data to a chart setup on HighCharts.
Project tutorial by cb77
In this tutorial I will show you how to make gas leak alert security alarm using arduino nano and mq 5 gas sensor
Project tutorial by shashwatraj98765
Exciting project to display the direction of tilt using 8x8 led matrix.
by Adhyoksh Jyoti
Use to record somebody's blow strength. Since without calibration it is relative value.
Project in progress by Wen-Liang Lin
This device allows you to record current, voltage, and power values onto an SD card. Recorded data can help to create useful graphs.
Project showcase by Varun Chandrashekhar
You will learn how to build a thermometer with Arduino and the LM35 sensor, as well as how to build an enclosure for your project.
Project tutorial by Moreira
This is a tipping bucket rain gauge designed in two separate modules; an outdoor sensing unit, and an indoor display with SD card data.
Project tutorial by Bcjams
Cheap and Simple 3-Axis Gauss Meter
Project tutorial by Tanishq Jaiswal
In this project, I have shown how to interface a GPS module with Arduino UNO. The data for longitude and latitude is displayed on the LCD.
Project tutorial by Ruchir Sharma
This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.
Project tutorial by ThothLoki
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
Use the DHT Temperature Sensors in C# code via a C++ Windows Runtime Component to implement a one-wire protocol on Windows 10 and the RPI2.
Project tutorial by Daniel Porrey
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
Water quality, anywhere, anytime!
Project tutorial by Hao Jie Chan
Simple Temperature Monitoring with DHT22 & Arduino.
by Muhammad Afzal
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Project tutorial by Mirko Pavleski
This video will illustrate the working principle of the Water Quality Monitoring and Notification System.
Project showcase by emmanuel ani
This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback.
Project tutorial by Ammar Atef Ali
BrewBench - Is an Arduino home brewing kettle temperature monitor, controller and notification system. It can work as a RIMS system.
Project tutorial by Team BrewBench
UltrasonicEyes is a fun and quirky project you can place somewhere and watch as it looks at things moving around in front of it. Freaky!
Project tutorial by Unexpected Maker
Or connect with your social account:
New here? Create an account