This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
This projects detects knock using Arduino UNO and sends notification to Windows 10, Ubuntu.
by Random Science Stuff
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
Put on your aerospace engineering hat! Explore how different materials absorb and transmit heat to simulate space capsule re-entry to earth!
by Jen Fox and Hacking STEM
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
This project will show you how to use an MQ-2 gas sensor.
Did you know that a standard three-wire PC Fan can be used as a sensor?
by Daniel Porrey
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
A system to maintain the pH level of a sample within a defined range.
by Atlas Scientific
Ultra low-cost flow-through photometer for on-line measurements of bacterial density.
by Alex Kutschera
I've always wondered if there were any real differences between temperature and humidity sensors, especially DHT11 and DHT22.
by Achraf Oukheir
Need your project to gauge distance? Here's your module!
Real-time pH and salinity monitoring with LED indicators.
How to temperature compensate the Atlas salinity sensor automatically.
This project shows tilt sensors and its functions.
Connect Infrared Obstacle Avoidance Sensor to Arduino Nano and program it to detect obstacles - Quick and Easy!
by Boian Mitov
A basic introduction to the low cost and accurate HC-SR04!
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
by Dragos Iosub
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
Replace the PIR motion sensor with this module and it's 360° detection angle baby!
Or connect with your social account:
New here? Create an account