Shoot fireballs from your fists when you throw a punch with these arm mounted smart flamethrowers!
Project showcase by Allen Pan
Interfacing MAX30102 with Arduino + BPM measure project with OLED + buzzer.
Project tutorial by SurtrTech
An innovative wearable technology for visually impaired peoples.
Project tutorial by Muhammed Azhar
An easily constructed USB-powered pulse oximeter device that can be built for around $25 and features an OLED display.
Project tutorial by Arduino “having11” Guy
How to measure heart rate with an Arduino.
by Ingeimaks Ingeimaks
The aim is to convert basic symbols that represent the 26 English letters as mentioned under American Sign Language script and display.
Project tutorial by 3 developers
This health band can assist old people in their daily lives, leaving the family stress free!
Project tutorial by Technovation
How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.
Project tutorial by Giulio Pons
The smart tunnel prevents further outspread of COVID-19 / SARS-CoV-2. It can disinfect a person fully in a time span of just 15 seconds.
Project tutorial by Yash Nayak
Simple yet Effective way to Fight COVID-19 with Hand Wash and Hand Santization, without touching the Bottle!
Project tutorial by Mission Critical
A smartwatch with fall and location detection, reminders and more, designed to help you or your loved one with Alzheimer's!
Project tutorial by Abdullah Sadiq
Get your heart rate, not just an IR sensor reading.
Project tutorial by Johan_Ha
This project displays the heart rate at the unit of beats per minute over the Internet so that it can be monitored from anywhere.
Project tutorial by Team Technopaths
A rather convenient device to monitor heart rate while running.
Project tutorial by Dmytro Dziuba
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
This accessory can be attached to most hand sanitizer/soap dispensers to make them Completely Automatic and Hands-Free!
Project tutorial by Nikolaos Babetas
3-channel EMG allows to control individual fingers with very little delay.
Shows you how you can connect ProtoCentral's MAX30100 breakout board to an Arduino for PulseOx and heart rate measurement and visualization.
Project tutorial by Protocentral
UV-C / heat, Arduino-controlled, face-mask disinfecting device for Coronavirus (SARS-CoV-2). #COVID19DetectProtect
Project tutorial by Team NeedLab
Mobile electronical device for blind and visual impaired people mobility.
by Fabrizio Lapiello
The smart insole collects foot pressure data in real-time. Through Thinger.io the information is fed into a system that visualizes the data.
Project tutorial by Juliette van der Pas
This Coronavirus Doorbell will detect people with high fever outside your home.
Project showcase by Roni Bandini
Use an infrared sensor to sense eye movements and control an LED.
Project tutorial by HomeMadeGarbage
MAX86150 puts ECG and SPO2 on a single chip, opening new opportunities for calculation of pulse transit time and indirect blood pressure.
Or connect with your social account:
New here? Create an account