This project is about a alarm turn on while the distance between two people is smaller than 1.5 meter the minimum recommended for population
Project tutorial by ELÉTRICA SIMULAÇÕES
An innovative wearable technology for visually impaired peoples.
Project tutorial by Muhammed Azhar
An easily constructed USB-powered pulse oximeter device that can be built for around $25 and features an OLED display.
Project tutorial by Arduino “having11” Guy
Hand Wash Reminder is a Hand Band which reminds you to wash your hands after every 20 minutes.
Project tutorial by Mukesh Sankhla
Employee access to the enterprise using RFID tags and employee temp measurement using a contactless thermometer that sends data to the cloud
Project tutorial by Victor Petin
Interfacing MAX30102 with Arduino + BPM measure project with OLED + buzzer.
Project tutorial by SurtrTech
An automatic temperature scanning gate is presented to verify the body temperature of any intruder.
Project tutorial by Team RoboticsBangladesh
A wearable badge that warns users if they encroach another user's safe social distance. Low cost and no infrastructure required to operate.
Project tutorial by filipmu
The Haptic Proximity Module (HPM) enables people with low vision, or other vision impairments, to engage with their direct surroundings.
Project tutorial by Imran Shamsul
UV sterilization lamp based Helmet sterilization box is presented in this project.
While I exercise it plays music to keep me motivated and afterwards dispenses a reward, a Tic Tac!
Project tutorial by Nikolaos Babetas
Admit it, you always wanted to play around with a breath controller but couldn't justify the expense. Well, you have no excuse now.
Project tutorial by Costis
This project is used to measure temperature by Infrared thermometer automatically and inform result by speaker. It also comment your result
Project tutorial by engineer2you
Experimental studies would assert the possibility that PM10 may act as a “carrier” for the spreading of the viral infection of COVID-19.
Project tutorial by Mario Soranno
As a digital company, our product is : Smart solar public hand sanitizer/wash that is controlled by a sensor Hereby reduce spread of virus.
Project tutorial by Onwusoro Ifeanyi Emmanuel
Wirelessly Scan your temperature viewed using mobile phone thru Bluetooth. Place the device and view the temperature from a distance.
Project tutorial by engrpandaece
This is a anti face touch alarm cap that doesnt allows to touch your face.. this is a trainer cap to not to touch our face!!!
Project tutorial by Dynamic Innovator
Build a sterilizer using a UV-C lamp and a 3D printed enclosure!
Project tutorial by Neeraj Rane
A touch-free germs disinfecting device that can disinfect anything from masks, wallets to mobile phones, killing maximum germs using UV-C.
Project tutorial by Yeshvanth Muniraj
Control the number of customers in a store using a phone app to ensure social distancing.
Project tutorial by Harry Anderson
Lora network based covid-19 patient monitoring device.
Project tutorial by iot-bangladesh
Monitor patients sent to self-isolate with the coronavirus by collecting their temperature, heart rate and location with a wristband.
Project tutorial by Andrei Florian
How to Make Blood Oxygen & Body Temperature Measurement with MAX30102 Pulse Oximeter using Arduino
Project tutorial by DKARDU
3-channel EMG allows to control individual fingers with very little delay.
Project tutorial by Dmitry Dziuba
Or connect with your social account:
New here? Create an account