Interfacing MAX30102 with Arduino + BPM measure project with OLED + buzzer.
Project tutorial by SurtrTech
Get your heart rate, not just an IR sensor reading.
Project tutorial by Johan_Ha
How to Make Blood Oxygen & Body Temperature Measurement with MAX30102 Pulse Oximeter using Arduino
Project tutorial by DKARDU
If you want a device that could measure your heart beat and plot its curve trace on an OLED display, then this will be your best guide.
Project tutorial by DIY GUY Chris
In this tutorial we show how to build a cough detection system for the Arduino Nano BLE Sense using TinyML and Edge Impulse.
Project tutorial by Edge Impulse
A small COVID medical kit that measures SPO2, Heart Rate and ECG. ECG readings are analyzed and shared via Matlab on to ThingSpeak.
Project tutorial by Ninety99
Prevent back pain by detecting bad posture and correct it immediately!
Project tutorial by Gini76
LED ring that blinks to your heart beats and displays current BPM both by number and color of illuminated LEDs.
Project tutorial by Dmytro Dziuba
This simple project want help people and institution in this Emergency. A pulse oximeter for fast reaction to the Covid-19.
Project tutorial by cerebrum_2020
How to make a Push-up Counter using Arduino and Ultrasonic Sensor HC SR04, 4 digital 7 segment display
Project tutorial by herolivechannel
Make a heart beat sensor with only an infrared emitter and a receiver, Arduino and see the real time plot of your heart beat.
Project tutorial by yashastronomy
How to make a portable thermometer sensor MLX90614 with an Android device as display.
Project tutorial by SekolahRobot
A smart gadget made with Arduino that makes sure you never miss your medicine or pills.
Project tutorial by ashraf_minhaj
A portable small device to verify anywhere the UV index in the sun rays.
Project tutorial by fmarzocca
A simple timer to ensure the duration of hand washing is 20 seconds
Project tutorial by Akshay Joseph
Using Kemet SS-430 to count push up.
Project tutorial by Team MixPose
Admit it, you always wanted to play around with a breath controller but couldn't justify the expense. Well, you have no excuse now.
Project tutorial by Costis
Make Automatic hand santinizer using ultrasonic sensor module, arduino uno and rc servo motor
This tool signals optically and acoustically in several stages when the minimum safety distance is undershot.
Project tutorial by DL1EKM
Hi, my name is Rohan Barnwal and in this project I have taught you that how you can build a device which help you to maintain social distanc
Project tutorial by Rohan Barnwal
How to use multiple ultrasonic sensors to keep your distance in times of corona or to keep your car safe while parking.
Project tutorial by jourshomme
A low cost easy to re-make UVC Sterilizer for sterilizing medical equipment and stuff.
Project tutorial by Arnov Sharma
Touchless hand wash timer that shows a countdown clock & also plays a rotating selection of 20-second jingles. Add your own jingle easily!
Project tutorial by Sridhar Rajagopal
Experimental studies would assert the possibility that PM10 may act as a “carrier” for the spreading of the viral infection of COVID-19.
Project tutorial by Mario Soranno
Or connect with your social account:
New here? Create an account