In this tutorial, I will show how to interface a 5V relay with Arduino and control an AC load.
by Mayoogh Girish
This library allows an Arduino to easily display numbers and characters on a 4 digit 7-segment display without a separate 7-segment display.
by Team essoselectronic
This project illustrates switching using a transistor.
We will teach you that it is possible to write only one Serial.print line to display several messages.
by 3 developers
A simple tutorial on getting readings from an ultrasonic sensor
by Damien Murtagh
Read the soil moisture level (Dry-Perfect-Wet) and display results on a corresponding LED.
In this tutorial I will show how easy it is to read and process analog input values.
by Sebastian Peryt
This article provides a brief overview of the Internet of Things.
by Pooja Baraskar
A Multi Rotor running with Arduino UNO Board and 6-axes Gyroscope MPU-6050
How to design circuits that allow you to drive a load that needs a higher value of voltage or current than Arduino can drive.
Learn how to set up the Dagu Rover 5 using this step-by-step tutorial.
by Herbie Ashworrth
In this project I show how to build a particles detector with data display, data backup on SD card and IoT with Android application.
A four-digit seven-segment counter with three options.
This lesson is about interfacing LCDs with Arduino.
This tutorial will describe basic interface elements of LabVIEW environment and how to make basic application for Arduino.
Using LEDs as Binary No. and 2 button switches to add or subtract 1 point per push.
by Team P.O.I.N.T.
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
easy, creative and for begginers.
This project demonstrates the working with Shift Register.
The Arduino Bluetooth Relay 12 Channels App supports control of a 12 channel relay module via Bluetooth (HC-05, HC-06, HC-07 ect.) modules.
This project produces an audible warning with LED buzzer ISD1820 output when KY-037 input signal is over the limit.
by Team SEVEN-TECH
Electronic Swiss Army Knife based on Arduino, Qt and Python. Works on Windows and Linux.
by I/O Blocks Toolkit
Learn how to start with advanced application development and prototyping using only Arduino and LabVIEW.
This project detects changes in temperature based on your specifications, and then changes the color of a LED to the color of your choosing.
Or connect with your social account:
New here? Create an account