Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
An Arduino based Christmas tree decoration using basic electronic components and recyclable material.
Project tutorial by Salwa El Kaddaoui
An Arduino UNO-based classic kitchen timer with LCD display and buzzer
Project tutorial by I and myself
Module tutorial, signal visualisation and a simple code to measure not only sinewave signals but all types, like TRMS Ammeter. + LCD/OLED.
Project tutorial by SurtrTech
A desktop tetris game using 135 WS2812B RGB LEDs and played with a Wii Nunchuck controller.
Project tutorial by John Bradnam
Data logging from two electricity meters (type "eHZ") simultaneously and store data (time and value of reading) to an SD card.
Project tutorial by torstengeppert
An interesting light display using 64 glue sticks and 128 WS2812B RGB LED strips.
This project will show you how to make a simple Clock using a RTC Clock and a LCD.
Project tutorial by MisterBotBreak
How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.
Project tutorial by Giulio Pons
An accurate clock with date displayed on a 16x2 LCD using just the Arduino, the display and few buttons. No RTC module required.
Project tutorial by paulsb
It is a small touch switch board with display. It has also a temperature sensor for live temperature displaying.
Project tutorial by Ashwini kumar sinha
An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.
Project in progress by suhaskd
For use in DIY homebrew radio equipment such superheterodyne receivers, SDR, HAM QRP transceivers or RF generator.
Project in progress by CesarSound
VFO/RF generator for use in homebrew radio equipment such as direct conversion and superheterodyne receivers or ham transmitters.
Use Arduino Uno WiFi to access your home Ecobee thermostat and more, this is a good introduction to see APIs in action using OAuth keys.
Project in progress by Andrewjohnsen31
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project tutorial by Team Maverick
Creating a digital to analog converter (DAC) 8-bit using resistor ladder (R-2R Ladder) and implemented it in Arduino Uno to create signals.
by Team Instrumentation System
A basic introduction to the low cost and accurate HC-SR04!
Adjustable countdown timer using 4-digit 7-segment display.
Project tutorial by dmytrosavchuk
You activate the bomb by plugging it and hold button to defuse.
Project showcase by Nashboss100
A simple, small piano that is not only small as the name implies, but it runs off of the Arduino Nano Every.
by Christian Madlansacay
Arduino-based digital hardware synthesizer modules. Goal was to design something to be cheap and super easy to build. First iteration.
Project in progress by Daniel Sinderson
Send your Arduino to collect data from the edge of space!!
Project tutorial by nmrsthrust
A wearable band and iOS app to trace contacts, enable social distancing, report active cases and inform potential exposure by instant alert.
Project tutorial by Mithun Das
Or connect with your social account:
New here? Create an account