Mobile electronical device for blind and visual impaired people mobility.
by Fabrizio Lapiello
The FlySky joystick is adopted to control the speed and limitations of the ramp of two stepper motors
My project is about how to make a smart home with IoT.
by Team IUHTeam
è un automazione di un braccio pneumatico in grado di smistare il legno da ferro
Brought to the marked in 1976, Zilog's Z80 was the most widespread processor in the '80s until the 2000s. Let's bring it to life again!
by Doctor Volt
This project consist on a simple catch the beat game on Arduino.
Using a trimmer potentiometer and a 8x8 Matrix LED table.
by Juanma Alvarez Plaza
Autonomously functioning farmbot integrating IoT, image processing, automation, and Android application.
This magnificent model offers a solution in a greater electricity saving, better use of a solar sun power, and reducing the traffic jams.
by Davor Sijanovic
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
Ultra low-cost flow-through photometer for on-line measurements of bacterial density.
by Alex Kutschera
Failed but still teaches a lot.
This LED Display Module can works with two-color LED matrix in two sizes (large and small), as well a 7 segments x 4 digits.
The main objective of this project is to develop a smart home automation system with a button key fob transmitter by using RF.
by Dennis Mwanza
Control home appliances from anywhere in world using Internet. Make your home smart with Arduino and ESP8266 WiFi Module.
by Team iotboys
These 84 by 48 pixel LCDs are what you might have found in Nokia 3310. And what about using them in the Arduino projects?
Controlling Home Lights using Facebook Chat messages with the help of Arduino, ESP8266 WiFi and a relay board.
by Team IoTBoys
A digital device that visualizes analog signal.
This is an effort to automate almost everything in our home. Open Builds mechanical components are also used to automate curtains.
by Team Kamakshi's Smart Team
This tutorial takes you through the intricacies of setting up your RAK811 Lora node to talk to AWS ioT via the TTN LoRaWAN network
by Naresh krish
A smart pollution control device is set near the exhaust of the vehicle to alert the user when they are wasting fuel and causing pollution
by Team Flash
This robot took part in a competition and solved the maze.
An open-source, Arduino-compatible RF signal generator with Wi-Fi connectivity.
by Team ERA Instruments
Sending temperature and humidity from Arduino MKR1000 to Artik Cloud
Or connect with your social account:
New here? Create an account