This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

So the big aim here is obviously to predict the rain in the future. We'll build a system that does just that from scratch!

Use computer vision to control a Nerf gun, aim, and fire, all on its own!

A light-tracking turret based on two stepper motors - can rotate about 90 degrees in the vertical and 180 degrees in the horizontal plane.

This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.

A fully autonomous robot lawn mower.

Portable lighting station synchronized with music, with the Infineon CoolMOS C7 MOSFET.

Use Bolt IoT kit and Arduino Uno to make your own anomaly detection & temperature monitoring device in both modes, i. e online and offline.

We're going to learn how to automate electric shades (the ones that work with DC motors and are controlled by inversing polarity).

Despacito melody using Arduino Uno.

Ever wanted to use a newer GoPro camera on your 3DR Solo? Here is how you can connect and control the latest GoPro 5/6/7 camera models.

We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

We're proud to present our new project, “EPOXY RESIN LED CLOCK."

Water quality, anywhere, anytime!

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

Windows 10 IoT Core project to control pool components for example pool pump, waterfall and solar heater.

We will try to make a simple CNC machine with you.

Need fast cheap laser rangefinder for your Arduino project? You can use a laser tape measure for this!

An automated, smart, self-contained growing system that cultivates plants from seed to maturity!

Vintage-style, minimal sized enclosure for a Raspberry-Pi + Arduino Internet Radio.

Traffic Light Information System that lets the driver know at which speed he needs to drive in order to pass the green light.

The device displays animated GIF pictures on a rotating cylinder. The GIF pictures can be downloaded from a PC via Bluetooth.

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......

This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.