Who isn't fascinated with shift registers and blinking LEDs? Using the 74HC595 I'll show you how to control 24 LEDs with three pins.
by David A Riewe
With a few code tweaks you can use an UNO and the serial plotter tool like an oscilloscope to examine the power used by another project.
Did you know that a standard three-wire PC Fan can be used as a sensor?
by Daniel Porrey
Make your hardware push data to a Google spreadsheet.
by Gustavo Gonnet
Using Bluetooth LE module CC-41A (HM-10 clone) with arduino
by Achindra Bhatnagar
Control a PC with a gesture sensor, associating a key or a mouse click to each gesture.
by Mohamed Fadiga
LcdProgressBarDouble is an Arduino library for displaying a 2 progress bars in a single row in LCD display.
by Wilfried Loche
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
LcdProgressBar displays a progress bar in LCD display.
Have a successful connection between Arduino and Raspberry Pi using I2C Communication Protocol.
by Madhav Reddy
Tomomi Imura, developer evangelist at PubNub, walks through connecting the circuit built in part 1 to a remote user interface using PubNub.
Program your Arduino with an Android device over Bluetooth HC05.
Tomomi Imura, developer evangelist at PubNub, walks through setting up a Arduino simple circuit to blink a LED on-command using Johhny-Five.
This project will guide you to set up an alarm system using a motion detector.
Embedis is a library for creating simple embedded key-value servers using non-volatile storage like NVSRAM, FRAM, FLASH, or EEPROM.
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
Sense and control your Arduino Ethernet from Ubidots,
A write up that would show how to connect the maker (hardware) channel of IFTTT to hundreds of channels.
by Kaustubh Agarwal
Ever thought of controlling any electronic devices with your smart phone? Today I will show how to do it.
by Mayoogh Girish
Need to gauge angles? Here's your module!
Need your project to gauge distance? Here's your module!
This tutorial will illustrate the working of an RFID reader.
by Aritro Mukherjee
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
Thanks to Ionic framework we will send custom commands to an Arduino using a BLE device to light LED.
Or connect with your social account:
New here? Create an account