The LittleArm 2C is a 3D printed, Bluetooth-controlled, Arduino robot arm designed for STEM
Project tutorial by Slant Concepts
Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.
Project tutorial by Mirko Pavleski
Here is a step by step guide to making a "crawler robot."
Project tutorial by DIY GUY Chris
Improved version of the soldering iron controller for Hakko 907 iron.
To simplify building the controller, LCD screen is implemented.
Project tutorial by Alexander
A very low power consumption rechargeable temperature and humidity monitor that can run off a rechargeable battery for 12 days or more.
Project tutorial by paulsb
This is a simple square-wave generator that basically uses the TimerOne library allow you to generate a PWM signal at pin 9.
Modified exisiting project to include some sensors and extra buttons. Can use ESP01 to set time via NTP.
Project tutorial by Ratti3
A useful tool for accurately measuring long distances.
This is a thermometer intended for measuring the temperature in the room where we are staying, also known as room comfort thermometer.
A huge Nanoleaf like device made from soldering 12 PCBs each contains 7 WS2812B LEDs and anESP12F
Project tutorial by Arnov Sharma
How to make diffrent patterns for LED Cube 4x4x4 with shift registers
Project tutorial by viliamk
Copy colours from outside environment.
Project tutorial by Vishwas Navada
A robot that moves based on the hand gestures
Project tutorial by Ashwin S and Harish K
Experimental studies would assert the possibility that PM10 may act as a “carrier” for the spreading of the viral infection of COVID-19.
Project tutorial by Mario Soranno
An awesome open source, 3D-printed vase stand with addressable RGB LEDs that fade between selectable colors to light up your life.
Project tutorial by vorpalrobotics
Lacking a real antenna, I made this toy, to sit on my desk and point in the direction of the ISS or other satellites that I'm receiving.
Project tutorial by viorelracoviteanu
How to make balancing LED dot using WS2812 LED strip and MPU6050 accelerometer and gyroscope module.
A simple DIY project which can be done by anyone!!!! Make Arduino Nano sing your favorite songs with a buzzer!!!!
Project tutorial by adithyalokesh17
Simple to build and useful instrument for your lab.
This is another one of my series of unusual clocks. The time is displayed on the WS2812 LED strip containing 34 LEDs
An accurate clock with date displayed on a 16x2 LCD using just the Arduino, the display and few buttons. No RTC module required.
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
In this project it is presented 1-dimensional version of the classic game ‘Pong’ made with NeoPixel LED strip.
Nice looking wooden analog style clock with Arduino Nano and 1mA ammeters.
Or connect with your social account:
New here? Create an account