A quick tutorial on how the use the L298N Motor Controller with DC motors

An accurate clock with date displayed on a 16x2 LCD using just the Arduino, the display and few buttons. No RTC module required.

Serial Communication between ESP2866-12 (NODE-MCU) and Arduino to increase the number of analog pins as my primary work.

This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

Arduino-based digital hardware synthesizer modules. Goal was to design something to be cheap and super easy to build. First iteration.

A picture that updates every day.

Learn how to simulate throwing a dice with the Arduino and 6 LEDs!

A simple obstacle avoidance robot using an IR distance sensor with an IMU.

How to connect incremental encoders for industrial use with RS-422 interface to an Arduino UNO.

Make a simple and programmable servo arm out of readily available materials!

An Arduino based Christmas tree decoration using basic electronic components and recyclable material.

Module tutorial, signal visualisation and a simple code to measure not only sinewave signals but all types, like TRMS Ammeter. + LCD/OLED.

This project will show you how to make a simple Clock using a RTC Clock and a LCD.

VFO/RF generator for use in homebrew radio equipment such as direct conversion and superheterodyne receivers or ham transmitters.

Design of an indicative featured and speed controlled obstacle avoiding robot.

Creating a digital to analog converter (DAC) 8-bit using resistor ladder (R-2R Ladder) and implemented it in Arduino Uno to create signals.

A basic introduction to the low cost and accurate HC-SR04!

Adjustable countdown timer using 4-digit 7-segment display.

A simple, small piano that is not only small as the name implies, but it runs off of the Arduino Nano Every.

A programmable countdown timer with loud voice countdown and trigger for dangerous experiments like starting fireworks

A little tutorial to make a digital photo frame, and also use the touch functions to navigate between images.

Connect your microcontroller to the internet by adding ESP8266 WiFi module!

Tutorial for creating simple MIDI controller and usage of it in Ableton Live ( or any other DAW)

Sending Bytes to an 8x8 LED Matrix.