The goal is to assist students in solving real-world problems with the use of an automatic titrator developed with the Arduino microcontrol
Project showcase by iterjunior
An LCD1602 alarm clock that includes many of the other LCD1602 clocks found on maker sites.
Project tutorial by John Bradnam
RGB LEDs Triangular/Hexagonal Pixels Matrix
Project tutorial by Mukesh Sankhla
This cube is easy to build with no circuit board and minimum external components; and it comes with a lot of animations and effects.
Project tutorial by Doug Domke
A cheap and easy to use BLE Armband for Social Distancing and enabling Touch Free solutions for COVID-19
Project in progress by Utkarsh Verma
Inexpensive/disposable wearable two-way communication system for restaurant/grocery/retail workers
Project tutorial by Ish Ot Jr.
Build an affordable device that tests how well a face mask can protect from particulates. Record quantitative data (PM 1.0, 2.5 and 10.0).
Project tutorial by Chris Munz
Monitor the Temperature and Humidity in your room and also beam that data to Cloud.
Project tutorial by neverofftheinternet
You can use a touchscreen display and an Arduino to make a functioning calculator.
Project tutorial by seanmabli2
This product disinfects bills and coins, high-contact surfaces, to allow for cash dependent economies to survive in this pandemic.
Project tutorial by Naomi Voglewede and Biswajit Mishra
Purpose of this project is to write a code to control coin acceptor with Arduino so it can be used in other projects
Project tutorial by mdraber
An automated sanitizing system for shoes is presented throughout this project. Shoe sanitizer is used to disinfect shoes.
Project tutorial by RoboticsBangladesh
Here is my first step to crete the clock based on *x8 LED matrixes
Project in progress by mdraber
An easy to build LED cube with great animations that makes it worth the effort to build.
If you can't fix it in software you'll have to fix it in hardware in this case. Hence the NMEAtor.
Project in progress by Waps 61
Covid 19 touchless doorbell
Project tutorial by mohammadsohail0008
A Japanese zen garden built into a glass-covered picture frame.
Project tutorial by alexpikkert
See how an Arduino can be transmit music over AM with only a few lines of code.
Project tutorial by Doctor Volt
A wearable badge that warns users if they encroach another user's safe social distance. Low cost and no infrastructure required to operate.
Project tutorial by filipmu
This code performs FFT with good accuracy.
Project tutorial by abhilash_patel
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Project in progress by philippedc
A system to maintain the pH level of a sample within a defined range.
by Atlas Scientific
An Arduino car project based on the RoboRoverM1 chassis.
Project tutorial by Maksim
My lightweight Arduino GSM mobile phone.
Project tutorial by Avishek
Or connect with your social account:
New here? Create an account