Drawing and animating cat on glcd
Project tutorial by soso artist
Have you ever wondered how much your hamster actually runs each night? This is a simple (work-in-progress) fitness tracker for hamsters.
Project in progress by Peter Gullberg
Control your IoT devices with Arduino 101, DFRobot LCD Keypad Shield and autonomous IoT communication via the IoT JumpWay.
by Adam Milton-Barker
Arduino/Intel Edison project with a stroboscope and motor controller. This setup can easily be used to create film sculptures.
Project in progress by Harlen Bains
Learn how to build an IoT application over Sigfox integrated with Ubidots - send temp readings based on motion sensors.
by UbiMaker and Maria Carlina Hernandez
This is a variation of the Light Theremin project from the starter kit and features components soldered onto a PCB.
Project tutorial by jbrandstater
A bells and whistles rock tumbler for under $10. Too good to be true? Nope, it's not.
Project tutorial by Bob Computeers
Using Arduino to make a bicycle change gears depending on pedaling cadence.
Project in progress by Shift4Me
Step by Step instruction on how to build a very simple root from scratch by using the Arduino Board.
Project tutorial by makersecrets
Dealing with ill people or elderly at your home? No problem, here's the solution.
Project tutorial by Aitor Gamarra
This is a biped Arduino robot with 4 servo motors. This robot can walk, kick a ball, and do a funny dance.
Project tutorial by s_r tronics
You can check in to home / office or even your grandma's house by simply walking in front of an ultrasonic sensor.
Project showcase by Guest
We'll show you how you can post a Facebook status update from your Arduino Yún.
When paper shredder is filled by paper trash, Arduino notifies someone via Gmail that the trash bin is full and it should be taken out.
Project showcase by phpoc_man
This is a fun and relatively simple prank that is ideal to use anywhere. It is fairly simple to build using circuito.io and arduino.
Project tutorial by Robin
Snowman replica that can chat with user to inform them whether outside temperature is safe for outdoor activity or not.
Project showcase by Mohammad Haizad
A hand gesture controlled robot using Matlab based on Arduino. It's controlled by the finger using Matlab image processing.
The Mega-Bread project is alive and well!
Project in progress by Pigeon-Kicker
Recreating old mosaic technique with lasers.
Project showcase by VOLNA
An SPI config change for using a Nokia LCD.
Project showcase by Tom van Loon
Low cost robots to assist recovery of patients with non-traumatic brain injuries.
Project showcase by Theragym
Or connect with your social account:
New here? Create an account