KeyMat is an intelligent workmat for a standing desk that tracks the user's calorie burn over the course of a day.
Project tutorial by KeyMat
The cloud switches are well known, but what happens when the local internet fails and the switch cannot connect to the internet?
Project showcase by Laurence HR
Turn Off the light, and it will turn ON: endless fun!
Project tutorial by Aitor Gamarra
Have you ever wondered how much your hamster actually runs each night? This is a simple (work-in-progress) fitness tracker for hamsters.
Project in progress by Peter Gullberg
For those LED's a leg short of three.
Project tutorial by Mr_Glenn
Best project phone is a calling Arduino robot using a DTMF decoder module based on Arduino.
Project tutorial by s_r tronics
This project is dedicated to my parents, but you can also use it for surprise events for someone special.
Project tutorial by Muhammad Afzal
This project uses the capabilities of the gen4-uLCD-43DT to collaborate with diverse platforms such as Arduino and HC-05 Bluetooth Module.
Project tutorial by 4D Makers
Show spooky messages (inspired by the Stranger Things Ouija board) using a pan & tilt servo controlled by a BASIC program.
Project showcase by Peter Smith
Smooth real time Fade & Dimm up to 20 LEDS with normal digital IO's
This is done by an ISR routine swithing the LEDS between 1.5 and 2 Khz
Project showcase by erkr
An Arduino based word clock that tells the day of the week, the month, day and year and the time to the minute in words.
Project showcase by garysat
A symmetric power source for audio amplifiers controlled by the Arduino's PWM with max output +-30v 10A.
Project showcase by Joao_Claro
A cuddly, interactive IoT buddy that teaches, comforts and empowers children.
Project tutorial by Justin Revelstoke
This demonstrates how to use your Arduino MKR1000 to connect to InitialState.com to produce colorful visualizations of your sensor data.
Project tutorial by Stephen Borsay
An introduction to moisture measurement.
by Ingo Lohs
Make an interactive project on the LattePanda, plug in sensors to make it more funny. You can also do it on your computer or Raspberry Pi!
Project tutorial by Haoming Weng
Capacitive Board (CapBoard) is a device based on Arduino Nano for turning conductive objects into a capacitive sensor to detect the touch.
ATtiny programmer board to use Arduino UNO as ISP.
Project tutorial by xreef
A web-controlled smiling snowball based on the Arduino MKR1000 controlled via WiFi using MQTT, Shitr.io and Node-red.
Project tutorial by Niels van Breederoode
BH1715 is a digital Ambient Light Sensor with an I²C bus interface. The BH1715 is commonly used to obtain the ambient light data.
Project tutorial by Dcube Tech Ventures
Do you want to conserve energy and turn the Christmas tree lights on/off when not required? In IOT era, that can be done using MKR1000.
Project tutorial by Sameer
Or connect with your social account:
New here? Create an account