A quick intro into to the IoT JumpWay. A Intel® Arduino 101 IoT Dev Kit LED example with IoT communication via the IoT JumpWay MQTT Library.
by Adam Milton-Barker
Fast function getDS1307timeStamp().
A smart valve that automatically stops the flammable gas supply when gas leakage takes place or fire occurs for protection.
Project in progress by Ashwini kumar sinha
Provocation 1: Counter Culture
Project tutorial by 5 developers
A simple but robust protocol to send messages (from php, master) and get responses from Arduino via USB. CRC8 and retry in case of error.
Project tutorial by
Affordable light quality/indoor environment shield. BLE support. Arduino-101. Designed for the 2017 Co-Making the Future competition.
Project showcase by John Augustino Spounias
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
You'll learn how to store the last command used for actuate or desactuate a charge/device.
by PCBWay and Silícios Lab
When bitcoin rise or fall than certain amounts sends email.
Project showcase by Guest
An Arduino Uno-controlled synthesizer with knobs, joystick, and ribbon controller in a portable package.
Project tutorial by GroupGets
A pen holder that determines when there are two or less pens and triggers an Amazon pen set replacement.
Project tutorial by Alex Merchen
How long were we released from the gravity of the Earth? This machine measures how many seconds we are zero gravity state.
Project showcase by hminowa
We'll show you how you can post a Facebook status update from your Arduino Yún.
Control your IoT devices with Arduino 101, DFRobot LCD Keypad Shield and autonomous IoT communication via the IoT JumpWay.
For Arduino Yùn, adds new REST commands, enabling tunnelling for I2C messages.
I wanted to make an electronics learning kit suitable for ages 12 and above. Nothing fancy like Elenco's kits but It can be done at home.
Project tutorial by Ahmed Mo'nis
Example of the use of a Digital PDM microphone.
Project in progress by JohnV
Making an IoT project, but tired of stalled web and server-access times. This WDT serves hardware and software reliability you looking for.
A generic setup for museum exhibit automation. DFRobot 4 relay shield 2.1 and screw shields, Hitachi 16*2 Display shield on UNO or Mega.
Project in progress by
It came with only an on/off switch. Adding an UNO to this LED chalkboard really gets your attention - it is quite a flashy pig.
Project in progress by Team ArduBacon
Clock to activate and de-activate a regular telephone wall connection to allow telephone calls only during selected hours.
Project showcase by eluyten
The climate change is upon us! We badly need an environmental monitoring system deployable in seconds.
Project in progress by giovambattista vieri
Board for sensing voltage /current air temperature and motion via I2C and being sent to Librato for monitoring.
Project tutorial by Jade Perreault
Use this setup with everything in you house, because full control with just your voice lets everyone live in a 'house of the future!'
Project tutorial by Erik Lane
Or connect with your social account:
New here? Create an account