This variation of the popular word clock is controlled by 114 servo motors.
Project showcase by mvonsivers
This magnificent model offers a solution in a greater electricity saving, better use of a solar sun power, and reducing the traffic jams.
by Davor Sijanovic
Project tutorial by dev009
WS2812 LEDs in drums!
Project showcase by bdorer
Learn how to make a simple keyboard controlled model railway layout with the help of an Arduino microcontroller.
Project tutorial by Kushagra Keshari
An interactive wall that mixes exercise with games.
Project showcase by Natthakit KIMBAB Kang
This project is used to detect the motion of a comatose patient during his treatment. this will be a 24 hours monitoring system.
by Sreehari Thulasi
Serial communication between Thorlabs PM101 power meter and Arduino.
Project tutorial by Cathanys
Why you can blank, void setup()
In this project, we are going to make a device to unlock our computer running on any operating system using an RFID card.
Project tutorial by Najad
Dynamic Pixelation is part of Dynamic Environment studio.
Project showcase by Mostafa Alani, Ph.D
Ultra slow pitch (string) shifter.
Project showcase by vtol
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
Project showcase by potentprintables
I am designing and building an MSE (Mouse) Droid from Star Wars, which will have a hidden payload.
In this tutorial, you'll learn how to connect your Arduino MKR WiFi 1010 (or MKR 1000) board securely to AWS IoT Core.
Project tutorial by Arduino_Genuino
An Arduino electromechanical barometer.
Project tutorial by Mirko Pavleski
Turn ON or OFF lights by thinking about them? Or check your mood by the color of an RGB LED? Make this now yourself easy and cheap!
Project tutorial by sieuwe
Contains Arduino Nano, two step motors and motor drivers, and one servo.
Inexpensive to build but a very useful tool for every electronics laboratory.
This project will show you how to make a DIY automatic railway crossing.
Project tutorial by STEMpedia
Partially 3D-printed robot based on Arduino Nano, servos, ultrasonic sensor, and LDR resistors.
This is the basic model of the SMARS robot taken from the Thingiverse.
Make a cheap variable power supply using the buck converter.
Project showcase by Neeraj Rane
How to make a color sensing device using a TCS3200 color sensor.
Project tutorial by munazirali4793 and Creatjet3D-Labs
Or connect with your social account:
New here? Create an account