An automated probe that collect CO2 flux data on lake Mendota, WI.
Project showcase by SHUAI ZHANG
We will try to make a simple CNC machine with you.
Project tutorial by TheTNR
A rotary table for 3D photography.
Project tutorial by lejbron
These libraries for a torch can do different functions. Each version is similar to each other with updated functionality and control.
Project in progress by tinkersprojects
A technique for drastically reducing the pins required by a matrix keypad is described.
Project tutorial by Giovanni Carrera
Read the soil moisture level (Dry-Perfect-Wet) and display results on a corresponding LED.
line following robot setup using an L298N motor driver with an Arduino and two proximity sensor modules
Project tutorial by Arnov Sharma
It would be fun to see how your Instagram posts perform in action!
Project tutorial by ElectroPeak
An amazing off-road robot with 4-wheel drive.
Project tutorial by Jithin Sanal
A paper piano that relies on human touch for audio output using transistors.
Project tutorial by Jeremy Sow
This project demonstrates the use of electronics and embedded system with clock.
Project tutorial by the lonely programmer
Arduino-based smart home hub allows you to control your devices remotely from outside and monitor your home environment from your phone.
Project tutorial by amrmostaafaa
DIY Arduino hot air SMD rework station.
Project tutorial by Alexander and Manoj B R
Basic weather system, in/out temp and humidity with heat index, dew point, pressure and weather prediction and time and date.
Project in progress by Fathead
A standard speaker can be used to detect vibrations and send data to a microcontroller.
Project tutorial by millerman4487
Get the highest accuracy and efficiency when measuring altitude with BMP180 Pressure Sensors by using a tilt sensor and a vibration motor.
Project tutorial by Kutluhan Aktar
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
Can light wake you up in the morning?
Project tutorial by Jiří Praus
Here's my minimal setup of a coilgun which uses a relay module to trigger the coil.
This combines a two-axis joystick, a three-axis accelerometer, and two buttons into one package.
Did you ever get into a situation where you had to wire up two, three or more I2C sensors to your Arduino just to realize the limitation?
A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.
Project in progress by Petoi
A stereo VU meter built with an Arduino Nano and two NeoPixel LED rings.
Project showcase by ericBcreator
Turn an LED on and off using Windows Remote Arduino.
Project tutorial by Team Windows IoT
Or connect with your social account:
New here? Create an account