Do you want to create your own robot? Then this is your best guide. This is a smart robot controlled by an Android app so easy to build.
Project tutorial by MEGA DAS
This robot car follows voice command with the help of mobile for serial communication.
Project tutorial by aakash11
The mechanism of the project depends on the motion of many wires connected with each other...
Project in progress by Fablab_Irbid
This tutorial will enable you to create your own spin on the traditional Magic 8 Ball.
Project tutorial by Team College Bound
Design of an Indicative Featured and Speed Controlled Obstacle Avoiding Robot.
Project showcase by Maverick
If you want a device that could measure your heart beat and plot its curve trace on an OLED display, then this will be your best guide.
In this article, we're going to build a controller that you can use on Steam!
Project tutorial by Ingeimaks Ingeimaks
This time we are going to make the casing for a remote control made with Arduino Micro, IR-sensor and an LED.
Project tutorial by kengdahl
In this tutorial we show some techniques to avoid warping.
Learn how to perfect the first and most important layer of a print by using the “skirt”-feature.
The Materia 101 is the first official Arduino 3D printer. It runs using an Arduino Mega 2560 and a “RAMPS 1.4” shield. Learn the basics.
Printing PLA often requires proper cooling. Improve your Materia 101 fan system with a bigger fan and a fan duct design.
A LEGO compatible case for the Arduino Micro to be used together with the Arduino based LEGO power function IR-receiver.
This project is used to detect the motion of a comatose patient during his treatment. this will be a 24 hours monitoring system.
by Sreehari Thulasi
A touch sensor pad with sound sensor controlling AC/ DC lights.
Project showcase by Anbumachi
This project is related to Arduino and Vb.net.
Project in progress by Team Techno Brothers
This project introduces a functional extruder at a reasonable price, which can be affordable to the fablab community and others.
Different PLA filaments have different melting points. In this tutorial, we will find the ideal temperature for a specific PLA filament.
This is part of a Lego themed series of tutorials.
Tips and tricks for using your Materia.
There are many things you can fix around the house with a 3D printer. I’m going to fix the button on our microwave oven in the office.
Work with Slic3r and the Materia 101 and print a pirate hook.
This brick will allow you to include addressable LEDs in your LEGO models.
Using a BPI NB-IoT development board together with Arduino.
by banana pi
Or connect with your social account:
New here? Create an account