This stroboscope is a precise and versatile instrument which can be used to analyze periodic or fast motions.
Project tutorial by frenchy22
You'll learn how to create an automation system to communicate 3 Arduinos via RS485.
Project tutorial by Moreira
Admit it, you always wanted to play around with a breath controller but couldn't justify the expense. Well, you have no excuse now.
Project tutorial by Costis
Man and machine working together to create art.
Project tutorial by Sverd Industries
This project was inspired from Naruto Manga/Anime. If the sequence of hand signs was correct, it unlocked solenoid door lock.
Project showcase by Ikhsan I
A TensorFlow Lite Micro Speech model that detects wake words and turns on a different coloured LED light to emulate traffic lights.
Project tutorial by Mandy Wong
CovidTestDrone enables self-administered COVID-19 tests to be delivered within minutes to patient’s homes via drone delivery.
Project tutorial by Andrei Florian
Start sequence to race, then show winner for Hot Wheels type cars. Displays total race time, both car speeds and winning difference in ms.
Project tutorial by cooksprojects
This is a simple square-wave generator that basically uses the TimerOne library allow you to generate a PWM signal at pin 9.
Project tutorial by Mirko Pavleski
An easy to build simple weather station that connects to your smartphone via WiFi and Blynk.
Project tutorial by Doug Domke
A weather clock with RTC DS3231, 2 x weather sensor BME280, 20x4 LCD and brightness auto-adjust.
Project tutorial by viorelracoviteanu
Magnetic levitation of an 11 cm (4.3") illuminated globe, rotating at a constant speed and nicely fitted inside a wooden lantern.
Project tutorial by Herwig Taveirne
Verilog quick learning. Feasibility model creation. Accurate logic volume estimation. I2C connection. Education purpose.
Project tutorial by ebaera
Stepper-driven, MIDI-controlled tonewheel robot made with laser-cut sheet metal tonewheels and custom pickups. Powered by an Arduino Due.
Project in progress by themixedsignal
Using a gyroscope and NeoPixel LEDs, the system simulates a ball rolling inside a torus.
Project tutorial by guiliguili
Not enough fingers to play clarinet? With this project you can delegate solenoids to push two side-keys. Awkward fingerings whaaat?
Project tutorial by touchmysound
3-channel voltmeter with the ability to measure both negative & positive voltages on the same circuit or 3 different circuits simultaneously
Project tutorial by Shahariar
A low-cost home robot that can do tasks around the house.
Project showcase by nbaddorf
Easily display custom animated glyphs on 16x2 LCD using the createChar() function from the LiquidCrystal library.
Project tutorial by tusindfryd
Cafeino is a connected robot that makes high-end artisanal coffee mimicking the hand pouring technique of a skilled human barista.
Project in progress by user04650005
An example sketch that will read a simple toggle switch reliably, irrespective of the circuit design.
Project tutorial by ronbentley1
Turn an old organ console into a MIDI controller to use with desktop organ software like Hauptwerk or Grandorgue.
Project tutorial by Larason2
I made an Arduino library allowing simple communication with uECG device using nRF24 module - minimal example takes just a few lines.
Project tutorial by Dmitry Dziuba
You'll learn how to create a display led to print message through Bluetooth.
Project tutorial by Moreira and JLCPCB
Or connect with your social account:
New here? Create an account