Make this robot moves by just moving your hand!
Project in progress by abdelkader_ch
Driving DVD motor using an arduino UNO and motor shield
Project in progress by ramjipatel376
A LED strip development multipurpose module
Project in progress by Anas Mo
This is a board to control two Nokia screens to give my robot eyes. It will be connected to the microcontroller via I2C (two Wire).
Project in progress by Tim Jackson
The task was to control a lighting system with an Arduino via DMX.
Project in progress by max_loser
For use in DIY homebrew radio equipment such superheterodyne single/double conversion receiver, SDR, HAM QRP transceivers or RF generator.
Project in progress by CesarSound
Stepper-driven, MIDI-controlled tonewheel robot made with laser-cut sheet metal tonewheels and custom pickups. Powered by an Arduino Due.
Project in progress by themixedsignal
Cafeino is a connected robot that makes high-end artisanal coffee mimicking the hand pouring technique of a skilled human barista.
Project in progress by user04650005
Telescope or camera tracking system for astrophotography.
Project in progress by Nick
Real-time position data and AHRS data logged to a mSD card.
Project in progress by rkapteyn
8Bit Digital Delay / LO-FI Bitcrusher / Reverse Speech DSP Pedal Effects for Guitar, Voice, Synths, etc.
A morphing digital clock
Project in progress by ekaggrat
VFO/RF generator for use in homebrew radio equipment such as direct conversion and superheterodyne receivers or ham transmitters.
3 Oscillators Polyphonic Synth with MIDI using the Arduino Nano.
Replaced a bad keypad on the outside of my garage door.
Project in progress by ddsitzmann
A model rocket that guides itself autonomously.
Project in progress by Cole Purtzer
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
Project in progress by Mark Daniel Belarmino
This is a project of Radio Receiver LW/MW/SW Stereo FM with RDS, using Arduino Nano, Si473x Radio IC and 1.8in TFT color display ST7735.
Rolling Roof Computer Interface is an Arduino powered device that will automate a Roll-Off-Roof-Observatory.
Project in progress by cfar
Fan PWM controller with temp sensing and max speed button override
Project in progress by KaptenJansson
A device to translate sign language to speech
Project in progress by Ahmed Ramzi Houalef
A new customizable TVC mount that can stabilize your model rocket!
Put wild animals to work for a fee, follow my project, hardware, software AND, how I trained the bird.
Project in progress by Hans Forsberg
Test all electronic components with Component Tester UNO Shield.
Project in progress by Akshay Baweja
Or connect with your social account:
New here? Create an account