An alarm clock that can be controlled by means of a smartphone application over BLE.
by Alexis Santiago Allende
We train the Intel Arduino 101, with a 128 node hardware neural Network chip created by General Vision, to recognize OCR MNIST characters.
by Marcus O'Brien
Per-tip calibration and high-frequency temperature check by Timer1 for a more accurate soldering iron.
In this tutorial, we'll learn how to set up BLE GATT services to make a thermometer using Intel's Arduino 101
by Monica Houston
arduino bluetooth vehicle (final designed chassis)h
by Andres Duarte
Use PubNub and the Intel Edison to turn your Arduino 101 project into a true IoT project.
by Greg V
We used a TI FDC1004 breakout with an Arduino to measure liquid level in a bottle using the capacitance between two adhesive copper strips.
by Team ProtoCentral
Avoid SD card corruption on a non-responsive RPi using an Arduino to log into the serial console and restart your RPi from the root account.
by Ray Burnette
Here we are going to implement a bot which is going to detect obstacle in which we have three ultrasonic sensors interfaced with arduino
by Deligence Technologies
This project is an Arduino radar. It is a simulation of a radar.
We are going to demonstrate how we can see the humidity and temperature of our environment in our smartphone in real time using HC-05.
Here We are Connecting a Temperature Sensor(LM-35) To our Arduino Board And Maintaining A Log File Of Date And Temperature in google sheet
We are using a raindrop sensor to detect raindrop intensity. When the raindrop sensor detects rain, it will send data to Arduino.
In this tutorial I'm going to tell you how we can get the sensor data from Arduino Uno and sending it to the Raspberry pi through UART.
Here we are going to start our project with RFID-RC522 and Arduino with Ethernet Shield.
An open-source, Arduino-compatible RF signal generator with Wi-Fi connectivity.
by Team ERA Instruments
In this project we are going to demonstrate you Voice Recognition System using Arduino.
In this project we are going to turn on bulb from remote location using web services.
With the help of Firmata, the Arduino or Particle devices control from the PC.
by Ingo Lohs
This project consist on a simple catch the beat game on Arduino.
Using a trimmer potentiometer and a 8x8 Matrix LED table.
by Juanma Alvarez Plaza
Or connect with your social account:
New here? Create an account