This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
A device to translate sign language to speech
Project in progress by Ahmed Ramzi Houalef
For use in DIY homebrew radio equipment such superheterodyne single/double conversion receiver, SDR, HAM QRP transceivers or RF generator.
Project in progress by CesarSound
A simple 8x32 LED matrix alarm clock.
Project in progress by vikonix
An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.
Project in progress by suhaskd
This is a board to control two Nokia screens to give my robot eyes. It will be connected to the microcontroller via I2C (two Wire).
Project in progress by Tim Jackson
wardrobe which can suggest you which cloth to wear, notify you which cloth has been ignored.
Project in progress by Tan See Youu
An up to six digit number code that enables you to unlock a secret container.
Project in progress by 3 developers
Meet the little black rover that can do many things in your house without bumping into a single thing!
Project in progress by Cole Purtzer
A cheap and easy to use BLE Armband for Social Distancing and enabling Touch Free solutions for COVID-19
Project in progress by Utkarsh Verma
Minimalist cars race with a strip of smart LEDs and two switches.This project has evolved and now has its own website: www.openledrace.com
Project in progress by Gerardo Barbarov Rostan
An Arduino and Bluetooth-based Hot Wheels finish line timer to record cars' speed and determine the winner of each heat.
Project in progress by Unexpected Maker
An open-source Arduino base remote controller (transmitter) with many customization options for robots and drones.
Project in progress by alirezasafdari and syamil_zaini
VFO/RF generator for use in homebrew radio equipment such as direct conversion and superheterodyne receivers or ham transmitters.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Project in progress by Cmtelesann
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Project in progress by philippedc
Replace an unreliable cheap pressure switch with an Arduino-controlled high current relay. Ver 2 now includes an auto drain valve.
Project in progress by tomwyonkman
Full control on robotic arm gripper using Slider 1SHEELD app. on smartphones
Project in progress by Eng Osama Omar
A simple Arduino clock without RTC module for beginners.
Project in progress by Annlee Fores
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
Project in progress by Mark Daniel Belarmino
An electronic piano with 7 pitches.
Project in progress by Teo Zhi Yi
Custom car infotainment system with Arduino and Android head unit, interacting with the car over CAN BUS.
Project in progress by Ashcon Mohseninia
Play tic-tac-toe against a robotic arm.
Project in progress by DANNY003
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
Or connect with your social account:
New here? Create an account