The Otto builder community requested, and here we are developing the best printed circuit board for Otto or any biped robot.
Project in progress by Team Otto PCB
"Otto DIY with steroids" + Bluetooth + APP + switch + touch sensors + strength + sound detection...
Project tutorial by Otto builders
Tito is a Bi-ped, dancing DIY robot, derivative from Zowi and Bob. Basically has been adapted to a standard Arduino UNO board.
Project tutorial by Camilo Parra Palacio
A DIY Game console you can make and upload your own game like Snake or Pong.
Project tutorial by Md. Khairul Alam
a simple starship game using the MAX72XX LED-Matrix
Project tutorial by kreck2003
Integrate Blockly@rduino in IDE like a tool, compile and upload through Arduino IDE, totally graphic way.
Hi we use servo motors for this project, if you mean the Xplorer version, chekc documentation here https://wikifactory.com/+OttoDIY/x
If you just want "control" then you can with your computer via serial. Or if you add Bluetooth you can control with your phone.
this is great thanks! by using interrupts it means you can only use pin 2 and 3 for the buttons is there a way to change that?
Or connect with your social account:
New here? Create an account